IMPRESS is an acronym for Intermetallic Materials Processing in Relation to Earth and
Space Solidification. This project was selected by the European Commission and recently …

Bulk and surface properties of homemade Raney-type Ni catalysts and their Ni–Al alloy
precursors have been studied and compared with commercial samples, both promoted and …

It is a great challenge to fabricate the cracks-free nanoporous metals (NPMs) for flexible
supercapacitor electrodes, since the formation of corrosion cracks caused by dealloying …

The direct reductive amination of 2, 5-diformylfuran (DFF) with ammonia to 2, 5-bis
(aminomethyl) furan (BAF) was demonstrated, for the first time, over the commercial type …

Considering its application in developing Raney-type Ni catalysts and in metal surface
coatings, the study on the growth behavior of Al 3 Ni 2 intermetallic compound (IMC) at the …

Hydrogenation of citral has been investigated over Raney-type nickel catalysts prepared
from various Ni–Al atomised alloys. These alloys differ in phase composition; in particular in …

Novel micro-structured string-reactor designed as catalytically active wires placed in parallel
into a tube was developed. The small diameter of the channels (∼ 100μm) leads to a short …

Catalytic hydrogenation of mono-, di-and trinuclear aromatic compounds has been studied
under hydrogen transfer conditions at 150° C and 82° C in 2-PrOH as a hydrogen donor and …

To design tailored materials, it is highly desirable to predict microstructures of alloys without
empirical parameter. Phase field models (PFMs) rely on parameters adjusted to match …

Nickel nanoparticles (NPs) well‐dispersed in the aqueous phase were conveniently
prepared by reducing nickel (II) salt with hydrazine in the presence of the functionalized …