Tape casting is a well-established technique to fabricate ceramic tapes. This technique has
been usually applied to produce dense substrates for electronic applications, but recently …

Over the past decades, considerable efforts have been made to develop hierarchically
porous electrodes for the high surface area, the fast velocity of fuels/products to/away from …

This study unveils a novel concept of symmetric protonic ceramic fuel cells (symm‐PCFCs)
with the introduction of a self‐recoverable electrode design, employing the innovative …

Coking on nickel-based anodes is a key issue to be addressed for solid oxide fuel cell
(SOFC) when using hydrocarbon fuels. In this work, the methane conversion process over Ni …

The reduction/oxidation (redox) instability of a Ni-based anode during fuel-rich and fuel-lean
cycling conditions has been considered as one of the critical factors hindering the …

Direct utilization of hydrocarbon fuels in solid oxide fuel cells (SOFCs) has drawn special
attention for high energy conversion efficiency, low cost, and simple devices. However …

A co-fuel channel microtubular solid oxide fuel/electrolysis cell is successfully fabricated by
adding an insulating ceramic connector. The active electrode area of both of the …

Does generation of zero-carbon electricity from coal make sense for a decarbonized grid?
Coal-based integrated gasification fuel cell systems with CO 2 capture have the potential to …

A two-dimensional axisymmetric micro-tubular solid oxide fuel cell (MT-SOFC) model is
developed to study the influence of component (anode, cathode or electrolyte) thickness on …

Solid oxide fuel cells (SOFCs) have attracted a great deal of interest because they have the
highest efficiency without using any noble metal as catalysts among all the fuel cell …