Owing to its outstanding mechanical properties, γ-TiAl is desirable materials for cross-
generation aero-engines. Nearly 70 years of exploration have made it into the initial …

Due to friction, chip forming, and the induced heat in the cutting area, produced parts by
using machining operations have residual stress. Residual stresses caused by machining …

Tool condition monitoring is an important part of tool prediagnosis and health management
systems. Accurate prediction of tool wear is greatly important for making full use of tool life …

Selective laser melting (SLM) of Inconel 718 (IN718) alloy is common these days. The
microstructure and surface integrity of fabricated components are highly depend on SLM …

Chemical reactivity and poor heat conductivity make nickel (Ni) and its alloys difficult to
process. The aerospace industry's expectations for high-quality surfaces are one of the …

The interaction mechanism between the tool flank wear and the cutting force, in milling Ti-
6Al-4V, is of significance for its further development. However, the relationship between the …

The hottest parts of aerospace components are often made of heat-resistant materials. Due
to the high requirements in such parts and accelerated wear rates, machining is a …

Tool wear monitoring has been an indispensable strategy for workshop operators to know
the tool wear state accurately. Tool wear monitoring system can illustrate the effects of …

Abstract n the precision machining of in-situ TiB 2/7075 composite, the feasibility of
cryogenic minimum quantity lubrication (CMQL) was explored considering the requirements …

Machining processes remain an unavoidable technique in the production of high-precision
parts. Tool behavior is of the utmost importance in machining productivity and costs. Tool …