Cement asphalt emulsion mixture (CAEM) is an environmentally sustainable substitute for
hot mix asphalt and can trigger a substantial economic benefit. This paper systematically …

The article presents Polish experience with cold recycling of asphalt pavements with the
usage of bituminous emulsion and cement. In the 1990s numerous roads in Poland required …

The manufacture of conventional hot mix asphalt (HMA) for paving has a substantial
environmental footprint, and the production of clean asphalt mixture with good engineering …

This publication presents evaluation of long-term behavior of mineral-cement-emulsion
(MCE) mixtures. MCE mixtures are among the major products of cold recycling of old asphalt …

Certain disadvantages could have appeared while using hot mix asphalt (HMA), such as the
release of unhealthy gases into the environment (environmental issues), difficulty in …

The article describes properties of mineral-cement-emulsion (MCE) mixtures with addition of
rubber powder. The mixtures were created with the use of reclaimed asphalt pavement …

This study aims to develop a new type of cement asphalt emulsion mixtures (CAEMs) by
introducing high content of cement. Firstly, 4-h compressive strength and elastic modulus …

The publication presents fatigue properties of cold recycled mixtures for eight combinations
of binding agents (cement and bituminous emulsion). Cold recycled mixtures were …

The influence of technological factors on the properties of cement-bound mixes, hardening
at positive and negative temperatures in the construction of pavements, is studied. The …

Deep cold recycling with foamed bitumen (FB-RCM) is currently one of the most widely used
road rehabilitation methods. As the percentage of reclaimed asphalt pavement (RAP) in the …