In this paper, single crystals (SCs) of the Cs 2 AgBiBr 6 double perovskite were grown using
the method of crystallization from a supersaturated solution. It was shown that the natural …

The transient and steady-state dark current behaviors in various amorphous selenium (a-Se)
detectors are analyzed by developing mathematical models considering all possible …

Stabilized amorphous selenium (a‐Se) refers to a‐Se that has been stabilized against
crystallization by alloying it with As. Generally, the As content is below 1%, but it can be as …

Simple Summary The imaging detectors use blocking layers between the bulk
photoconductor and the metal contacts to reduce the unwanted charge carrier injection from …

A mathematical model for transient photocurrent and lag signal in x-ray imaging detectors
has been developed by considering charge carrier trapping and detrapping in the energy …

A novel amorphous selenium (a-Se) avalanche detector structure for low dose direct-
conversion flat-panel X-ray detector is proposed. The proposed structure contains blocking …

The reduction of the dark current (DC) to a tolerable level in amorphous selenium (a-Se) X-
ray photoconductors was one of the key factors that led to the successful commercialization …

The mechanisms of electric-field-and temperature-dependent effective drift mobility and
impact ionization coefficient of both holes and electrons in amorphous selenium (a-Se) are …

The photocurrent and the lag signals in amorphous selenium (a-Se) detectors have been
characterized by measuring the optical and residual currents under varying light intensity …

Amorphous lead oxide (a-PbO) is considered a promising photoconductor to replace
amorphous selenium (a-Se), extending the diagnostic capabilities of direct conversion …