In response to the increased emphasis on reducing carbon emissions, the demand for
lightweight, high-performance structural materials is quickly increasing, and Mg alloys …

Die-cast Mg–La, Mg–Ce and Mg–Nd binary alloys varying in composition have been used to
investigate creep resistance and its relation to microstructure. The remarkable differences in …

In this work, we have investigated the influence of RE content on the tensile property, creep
resistance, and microstructures of a die-cast Mg–9Al-0.3 Ca-0.2 Mn (wt.%). Minor content of …

A new high-pressure die-cast (HPDC) Mg–4Al–3La–1Ca–0.3 Mn (ALaX431) alloy with high
strength has successfully been fabricated. This HPDC alloy in peak-aged state exhibits …

In this work, we investigated creep behavior and microstructure evolution of cast Mg-4Sm-
2Yb-0.6 Zn-0.4 Zr alloy. The alloy exhibited temperature-dependent stress exponents (n …

This review sheds light on the creep properties of AZ91 magnesium alloys with a major
emphasis on the influence of microstructure on the creep resistance and underlying creep …

The creep behavior of the cast AZ91 magnesium alloy was investigated by impression
testing. The tests were carried out under constant punching stress in the range 100 to 650 …

The ability of the impression tests to obtain localized creep data is exploited to study the
creep behavior of the friction stir welded (FSWelded) joints made on 15 mm thick plates of …

The addition of 0.3% Mn to a Mg–2Al–2Ca (mass%) alloy improves the minimum creep rate
by one order of magnitude compared with the Mn-free alloy. Network-shaped Mg2Ca (C14 …

Creep properties of AZ91 magnesium alloy and AZRC91 (AZ91+ 1 wt pct RE+ 1.2 wt pct Ca)
alloy were investigated using the impression creep method. It was shown that the creep …