Specific contact resistance measurements of the screen-printed Ag thick film contacts in the silicon solar cells by three-point probe methodology and TLM method

PN Vinod - Journal of Materials Science: Materials in Electronics, 2011 - Springer
The specific contact resistance of the screen-printed Ag contacts in the silicon solar cells has
been investigated by applying two independent test methodologies such as three-point …

Exploiting metallic glasses for 19.6% efficient back contact solar cell

SJ Kim, SY Kim, JM Park, JN Heo, JH Lee… - Applied Physics …, 2012 - pubs.aip.org
An interdigitated back contact silicon solar cell with conversion efficiency of 19.6% was
fabricated by screen-printing the Ag paste. In the Ag paste, oxide glass frits were totally …

The electrical and microstructural properties of electroplated screen-printed Ag metal contacts in crystalline silicon solar cells

PN Vinod - RSC advances, 2013 - pubs.rsc.org
In the present study, electrical and microstructural properties of electroplated screen-printed
Ag metal contacts in crystalline silicon solar cells have been investigated. The metal …

[PDF][PDF] Real-Time Analysis for Enhancement of Photovoltaic Panel Efficiency and Quality

B Zine, C Labiod, K Srairi, A Benmouna… - Indonesian Journal of …, 2024 - researchgate.net
Renewable energy, particularly solar power, is crucial for tackling environmental issues.
Photovoltaic (PV) systems efficiently convert sunlight into clean electricity but require …

SEM and specific contact resistance analysis of screen-printed Ag contacts formed by fire-through process on the shallow emitters of silicon solar cell

PN Vinod - Journal of Materials Science: Materials in Electronics, 2009 - Springer
The SEM and specific contact resistance measurements of the Ag metal contact formed by
applying a fire-through process on the shallow emitter region of the silicon solar cell have …

The ohmic properties and current–voltage characteristics of the screen-printed silicon solar cells with porous silicon surface

PN Vinod - Solid state communications, 2009 - Elsevier
The ohmic properties and current–voltage characteristics of the silicon solar cells with fire-
through screen-printed Ag metal contacts on the etched porous silicon layers as …

Specific contact resistance measurement of screen-printed ag metal contacts formed on heavily doped emitter region in multicrystalline silicon solar cells

PN Vinod - Journal of electronic materials, 2013 - Springer
Multicrystalline silicon (mc-Si) wafers are widely used to develop low-cost high-efficiency
screen-printed solar cells. In this study, the electrical properties of screen-printed Ag metal …

Numerical Front Contact Grid Optimization for Photovoltaics

V Nikander - 2023 - trepo.tuni.fi
Photovoltaic converters are a key part of the power by light systems, which transfer energy
via light rather than electrical conduction or induction. They excel in applications requiring …

Formation of fire-through silver metal contacts on the porous silicon surface for silicon solar cells

PN Vinod - 2008 33rd IEEE Photovoltaic Specialists …, 2008 - ieeexplore.ieee.org
In the present study, the ohmic and microstructural properties of the fire-through Ag metal
contacts formed on planar and thin layers of the porous silicon for the silicon solar cells are …

Improvement of the electrical properties of the frontal contact in CdS/CdTe solar cells

DJ Olarte, OV Galán, MLA Aguilera… - Materials Research …, 2017 - iopscience.iop.org
The use of a high resistivity transparent oxides (HRT) onto low resistivity transparent oxides
(TCO) has been found to improve the performance of CdS/CdTe solar cells. In this work is …