Recent progress in the understanding of the deformation-induced martensitic transformation,
the transformation-induced plasticity (TRIP) effect, and the reversion annealing in the …

An AISI 304 austenitic stainless steel (ASS) with average grain size of approximately 48 µm
was selected to explore the effect of the low-temperature on mechanical behavior for …

Abstract 304 austenitic stainless steel plates have been deformed (10 to 40%) by multi-pass
cold rolling incorporating soaking at 0° C and− 196° C after each pass with an aim to …

Using a new design strategy for the metastable phase in transformation induced plasticity
(TRIP) steels, we have successfully manufactured a 7 wt.% Mn containing steel with an …

Strain partitioning and localization were investigated in a high-Mn steel (17.1 wt.% Mn)
during tensile testing by a correlative probing approach including in-situ synchrotron X-ray …

In the present study, a physically based constitutive and transformation kinetics model of
stress assisted (SA) and strain induced (SI) ε-, α′-Martensite and twinning in steels …

In this work, we studied the effect of initial grain size on the hot compression characteristics
of super-304H austenitic stainless steel in a range of strain rates (0.001–1 s− 1) at a fixed …

Deformation‐induced austenite‐to‐martensite transformation is an important phenomenon
that controls the flow behavior of transformation‐induced‐plasticity (TRIP) and TRIP …

The evolutions of nano-twins and martensitic transformation in 316L austenitic stainless
steel during large tensile deformation were studied by electron backscatter diffraction …

Two lean duplex stainless steels with different manganese contents (4 and 8 wt.%) were
deformed in the tensile mode in the temperature range of 25–300° C. The deformation …