Tuning in optoelectronic properties of In/Te bilayer heterostructure upon annealing at different temperatures: surface wettability and photo response study for photonic …
The current study depicted the influence of annealing temperature on In/Te bilayer thin film
of 350 nm synthesized by thermal evaporation method. The interfacial diffusion of In into Te …
of 350 nm synthesized by thermal evaporation method. The interfacial diffusion of In into Te …
Single and twinned plates of 2D layered BiI 3 for use as nanoscale pressure sensors
Hexagonal plates of layered bismuth tri-iodide (BiI3) at the micro-to-nanometer scale were
fabricated at room temperature via a simple solution phase synthesis without any stabilizer …
fabricated at room temperature via a simple solution phase synthesis without any stabilizer …
Effects of growth parameters on HfO2 thin-films deposited by RF Magnetron sputtering
Hafnium oxide is well known and extensively studied material for electronic and optical
applications. In this work, HfO2 films have been investigated at different radio frequency (RF) …
applications. In this work, HfO2 films have been investigated at different radio frequency (RF) …
Influence of laser fluence on structural, optical and microwave dielectric properties of pulsed laser deposited Ba0.6Sr0.4TiO3 thin films
Abstract Barium strontium titanate Ba 0.6 Sr 0.4 TiO 3 (BST6) thin films are deposited by
pulsed laser deposition method at different laser fluences keeping the oxygen pressure …
pulsed laser deposition method at different laser fluences keeping the oxygen pressure …
Probing of the influence of bilayer geometry, substrate temperature and post-deposition annealing on Si and Cr thin film interdiffusion through Raman spectroscopy
Cr and Si thin films were sequentially deposited on fused silica substrates by electron beam
evaporation. Two bilayer film geometries, one with Cr thin film at the bottom and the other …
evaporation. Two bilayer film geometries, one with Cr thin film at the bottom and the other …
Effect of substrate temperature on the optical properties of CaBi4Ti4O15 thin films deposited by pulsed laser ablation
SR Emani, KC James Raju - Journal of Materials Science: Materials in …, 2016 - Springer
Abstract Thin films of CaBi 4 Ti 4 O 15 (CBTi) were deposited at different substrate
temperatures (550–700° C) using pulsed laser ablation technique. Structural, morphological …
temperatures (550–700° C) using pulsed laser ablation technique. Structural, morphological …
Non-Classical Crystal Growth Recipe using nanocrystalline ceria a detailed review
SK Padhi, MG Krishna - arXiv preprint arXiv:1911.07454, 2019 - arxiv.org
In this review, room temperature (RT) precipitation of the nanocrystalline-ceria (nc-ceria) re-
dispersed and subsequently size-reduced by 20 kHz probe sonication in 25% ethylene …
dispersed and subsequently size-reduced by 20 kHz probe sonication in 25% ethylene …
Optical and microwave dielectric properties of pulsed laser deposited Na0. 5Bi0. 5TiO3 thin film
Optical properties of pulsed laser deposited (PLD) sodium bismuth titanate thin films (NBT),
are investigated at wavelengths of 190-2500 nm. Microwave dielectric properties were …
are investigated at wavelengths of 190-2500 nm. Microwave dielectric properties were …
Methods for Characterization and Quantitation of Nanomaterials
KL Naidu, T Gadipelly, R Anbazhagan… - Nanomaterials in the …, 2022 - taylorfrancis.com
Various pathogenic viruses and bacteria are often needed to be studied conveniently by
some of the co-existing conditions of nanomaterials. This chapter briefly discusses the basic …
some of the co-existing conditions of nanomaterials. This chapter briefly discusses the basic …
Effect of oxygen partial pressure on structural and optical properties of pulsed laser deposited CaBi4Ti4O15 thin films
The influence of oxygen partial pressure (OPP) on the structural and optical properties of
CaBi 4 Ti 4 O 15 (CBTi) thin films deposited by pulsed laser deposition have been …
CaBi 4 Ti 4 O 15 (CBTi) thin films deposited by pulsed laser deposition have been …