Rolling contact fatigue (RCF) of sprayed coating is complicated process relating to materials,
structures, loading conditions, etc. Herein, the research works over the past decades in RCF …

Abstract Development of anti-corrosion and wear-resistant materials in FLiNaK molten salt is
vital to the service safety and reliability of the various mechanical systems for the molten salt …

Anti-corrosion and wear-resistance coating is important to the reliability of the mechanical
systems served in molten salt media. In this work, the Al 2 O 3 coating was prepared on the …

This study examines the microstructure and mechanical properties of plasma transferred
wire arc (PTWA) coating of typical alloyed steel, deposited on diecast aluminum alloy …

Two types of CuNiIn coatings with different microstructures were successfully prepared on
the surface of a Ti–6Al–4V alloy by means of high-velocity oxygen fuel (HVOF) and plasma …

In the current investigation, cermet coatings (WC-10Co-4Cr) were deposited on CF8M steel
by detonation gun (D-gun) thermal spraying process. Subsequently, the slurry erosion …

The high-temperature oxidation of homogeneous and gradient coatings based on Ni-Cr-Al
obtained by detonation spraying is investigated. To assess the resistance to high …

Slurry erosion performance of detonation gun (D-gun) spray ceramic coatings (Al 2 O 3 and
Al 2 O 3–13TiO 2) on CF8M steel has been investigated. Slurry collected from an actual …

In this study, NiCrAlY based metal-ceramic composite coatings containing 30 wt%(Al 2 O 3+
h-BN) are prepared using advanced detonation spraying technology. A thorough …

In this research, the optimization of D-gun process parameters for depositing Al2O3-TiO2
coatings on SS410 steel has been explored, with a specific focus on enhancing resistance …