Sustainable solutions on fabricating and using a face mask to block the severe acute
respiratory syndrome coronavirus 2 (SARS‐CoV‐2) spread during this coronavirus …

Polylactic acid (PLA) is produced from renewable materials, has a low melting temperature
and has a low carbon footprint. These advantages have led to the extensive use of polylactic …

The present paper shows an experimental study on additive manufacturing for obtaining
samples of polylactic acid (PLA). The process used for manufacturing these samples was …

Fused filament fabrication (FFF), also known as fused deposition modeling, is the leading
technology for polymer‐based additive manufacturing. The simplicity, along with the …

The printing variable least addressed in previous research aiming to reveal the effect of the
FFF process parameters on the printed PLA part's quality and properties is the filament color …

Bonding of parts produced by fused filament fabrication (FFF) significantly depends on the
temperature profile of filaments depositing one top of each other. It is necessary to evaluate …

In the present paper, we address the influence of print orientation angle on surface
roughness obtained in lateral walls in fused deposition modelling (FDM) processes. A …

The dimensional quality and mechanical properties of a fused filament fabrication (FFF)-
printed 3D model are influenced by several process parameters. A forced-air cooling system …

This present study focuses on evaluation of mechanical properties of three dimensional (3D)-
printed carbon fiber/polylactic acid (CF/PLA) composites, using fused deposition modeling …

The growing demand for sustainable materials as substitutes for conventional materials has
led to the need for sustainable manufacturing practices that can effectively balance the use …