Sawing is the most common machining process and is present in both primary and
secondary wood transformation sectors. The objective of this paper is to review how it is …

The sound levels along with the cutting power registered during the sawing process of the
impregnated and non-impregnated pine wood at two feed speeds are shown and compared …

Three-layered composite materials consisting in wood-chips bonded by a resin
(particleboard) were successfully produced from two by-products: plum and apple tree …

The size of wood is reduced by splitting or chipless cutting whilst logging trees, limbing, or
preparing wood to be a fuel, for example, or in order to improve the efficiency of wood drying …

Reducing the kerf width in bandsawing has potential in reducing waste while optimising the
yield. To be able to reduce the kerf width, understanding the cutting forces becomes critical …

In the classical approaches, used in Central Europe in practice, cutting forces and cutting
power in sawing processes of timber are commonly computed by means of the specific …

The objective of this work was to evaluate the effect of the impregnation process of pine
wood (Pinus sylvestris L.) on roughness parameters of the surface processed on a frame …

In this paper, absolute and density normalized cutting model parameters of natural and
impregnated Scots pine (Pinus sylvestris L.) are shown and a method for the calculation of …

A new computational model, based on fracture mechanics, was used to determine cutting
forces. Unlike traditional computing methods, which depend on many coefficients reflecting …

The modern wood converting processes consists of several stages and material drying
belongs to the most influencing future performances of products. The procedure of drying …