Impact of high Al2O3 content on the microstructure, mechanical properties, and wear behavior Al–Cu–Mg/Al2O3 composites prepared by mechanical milling
Metal matrix composites are increasingly being recognized as new wear-resistant materials.
The main purpose of this study is to investigate the microstructure, mechanical properties …
The main purpose of this study is to investigate the microstructure, mechanical properties …
Influence of Mg addition and T6 heat treatment on microstructure, mechanical and tribological properties of Al–12Si–3Cu based alloy
The aim of the present study was to investigate the influence of Mg addition and T6 heat
treatment on microstructure, mechanical and tribological properties of the Al–Si–Cu–Mg …
treatment on microstructure, mechanical and tribological properties of the Al–Si–Cu–Mg …
Microstructural and wear behaviour of Al 6063–W nanocomposites developed using friction stir processing
The goal of the present research is to introduce the Tungsten (W) nanoparticles as
reinforcement into Al 6063 alloy to produce Al–W nanocomposites by the FSP technique …
reinforcement into Al 6063 alloy to produce Al–W nanocomposites by the FSP technique …
Effect of multi-directional hot forging process on the microstructure and mechanical properties of Al–Si based alloy containing high amount of Zn and Cu
In this study, the hypoeutectic Al–7Si based alloy containing Zn and Cu was severely
deformed with multi-directional forging (MDF) process at 200° C. The samples were placed …
deformed with multi-directional forging (MDF) process at 200° C. The samples were placed …
The Effect of Heat Treatment on the Mechanical Properties and Oxidation Resistance of AlSi10Mg Alloy
In this study, the microstructure, hardness, tensile strength, and dry wear properties of the
cast AlSi10Mg alloy as well as the effects of processing parameters on the oxidation …
cast AlSi10Mg alloy as well as the effects of processing parameters on the oxidation …
Investigating the load and temperature-dependent dry sliding wear performance of Al–12Ce alloys with Si and Mg additions
The current study investigates the effect of load and temperature on the wear characteristics
of gravity-cast Al–12Ce, Al–12Ce-X alloys (where X= 4Si, 0.4 Mg, and 4Si+ 0.4 Mg), and …
of gravity-cast Al–12Ce, Al–12Ce-X alloys (where X= 4Si, 0.4 Mg, and 4Si+ 0.4 Mg), and …
Prediction of effect of fabrication parameters on the properties of B4C ceramic particle reinforced AA2024 matrix nanocomposites using neural networks
In the present study, a prediction model was created to predict the impact of B 4 C content,
milling time and matrix size on the hardness and density of AA2024-B 4 C nanocomposites …
milling time and matrix size on the hardness and density of AA2024-B 4 C nanocomposites …
Modified unreacted core model for reduction of manganese ore by CO gas
EH Kwon, JA Lee, JW Han - Metals and Materials International, 2022 - Springer
Pre-reduction of manganese ore has a direct impact on energy savings for the subsequent
smelting process. To this end, knowledge of the kinetics of the pre-reduction of manganese …
smelting process. To this end, knowledge of the kinetics of the pre-reduction of manganese …
Investigation of the Microstructure and Dry-Sliding Wear Behavior of Co Containing Al-Si-Fe Scrap Alloy
K Modalavalasa, GMK Namburi… - Tribology …, 2024 - Taylor & Francis
This study investigates the influence of cobalt (Co) addition on the microstructural and wear
properties of an aluminum (Al) scrap alloy containing high iron (Fe) impurity content (3%) …
properties of an aluminum (Al) scrap alloy containing high iron (Fe) impurity content (3%) …
Microstructure and Mechanical Properties of Severely Deformed Eutectic Al–Si–Cu–Mn Alloy
In this study, the microstructure and mechanical properties of severely deformed Al–12Si–
3Cu–0.5 Mn alloy were systematically investigated. The alloy produced by permanent mold …
3Cu–0.5 Mn alloy were systematically investigated. The alloy produced by permanent mold …