Thin-film solar cells based on Cu (In, Ga)(Se, S) 2 (CIGS) have demonstrated both high
efficiencies and a high cost-reduction potential in industrial production. This way, future …

Abstract Chalcopyrite Cu (In, Ga) Se 2 (CIGSe 2) thin film solar cells have emerged as a
popular absorber material among thin film technologies, leading with photoconversion …

Chalcopyrite-based solar cell deposited by solution processes is of great research interest
because of the ease of fabrication and cost effectiveness. Despite the initial promising …

Annealing colloidal nanocrystal coatings in a selenium-containing environment to form
polycrystalline thin films of the earth-abundant solar absorber copper zinc tin sulfoselenide …

Direct spray pyrolysis to form CuInS2 (CIS) on molybdenum substrate in ambient
environment has been a challenge because of the ease of Mo oxidation at low …

Abstract Cu (In, Ga) Se 2 (CIGSe) thin film solar cells were fabricated by direct inkjet printing
of Cu (In, Ga) S 2 (CIGS) nanoparticles followed by rapid thermal annealing under selenium …

Recently, environmental-friendly, solution-processed, flexible Cu (In, Ga)(S, Se) 2 devices
have gained significant interest, primarily because the solution deposition method enables …

The sintering of nanocrystals to form a bulk film is a promising route for the production of low
cost Cu 2 ZnSn (S, Se) 4 solar cells. However, very little is known about how the synthesis of …

Copper indium gallium selenide Cu (In, Ga) Se2 (CIGS) solar cells fabricated by vacuum
thermal evaporation, magnetron sputtering, or organic solvent solution‐process either lead …

We investigate three different precursor types for selenisation using a rapid thermal process.
Two of the precursor sample types are deposited via non-vacuum methods using particle …