Quasicrystalline alloys and their composites have been extensively studied due to their
complex atomic structures, mechanical properties, and their unique tribological and thermal …

The Al-based nanoquasicrystalline alloys are modern light weight alloys that respond to a
strategy to develop new Al-based alloys with excellent combination of properties over a …

This work investigated the phase formation, thermal stability, and mechanical behavior of a
metastable quasicrystal-forming Al 95 Fe 2 Cr 2 Ti 1 alloy prepared by selective laser …

Quasicrystal (QC) phases are often observed in Al-based alloys with Al content< 85 at%,
and their particle size is typically greater than 0.3 µm. In this study, an in situ formed QC …

In situ Al-matrix quasicrystalline Al-Fe-Cr-Ti composites produced using recycled material
were processed by selective laser melting (SLM). Three Al-Fe-Cr-Ti compositions (Al 95 Fe …

The precipitation behavior and mechanical properties for conventionally solidified Al-2.0
wt.% Cu-2.0 wt.% Mn alloy were studied. The supersaturated aluminum-based solid …

Normalized tensile samples of Al–4Fe–3Cr–2Ti (wt.%) alloy were successfully fabricated by
laser powder bed fusion (LPBF) additive manufacturing. The alloy's tensile properties and …

In present study, the nanoscale assignment behavior of strain and stress state at the
interface of T 2-Al 6 CuLi 3/α-Al matrix is investigated by Transmission Electron Microscope …

The effects of solute element content and cooling rate on the morphology of Al6Mn phase in
suction casting Al–Mn alloys were investigated by transmission electron microscope …

Quasicrystalline Al93Fe3Cr2Ti2 (at.%) gas-atomized powders, which exhibit a metastable
composite microstructure, were used to produce coatings by cold spray additive …