This paper reviews the production of sinters using the spark plasma sintering method. SPS
(spark plasma sintering) technology has been used for several decades, mainly in …

This paper presents a comparison of surface morphology obtained after machining Inconel
718 by the conventional insert, by Wiper insert and by using the cutting insert made by Spark …

The paper presents the results of the wear mechanisms research of uncoated cutting inserts
of tungsten carbides (WC) without Co matrix made by the SPS technique in finish turning …

Commonly used tool materials for machining wood-based materials are WC-Co carbides.
Although they have been known for a long time, there is still much development in the field …

ABSTRACT WC-Co cemented carbides are the most commonly used material for machining
wood-based materials. They owe their popularity to good properties, such as hardness and …

Carbide tool manufacturing is proposed by Additive Manufacturing to introduce flexibility and
customization in machining industries. Development and performance of the additively …

Abstract Cemented carbide 91 wt% WC–3 wt% TiC–6 wt% Co was sintered by spark plasma
sintering at different temperatures of 1200° C, 1300° C, and 1400° C and the effect of …

This article presents the microstructure, hardness, fracture toughness coefficient KIC and
phase composition of submicron WC-4Co carbides. The carbides were sintered using the …

WC-Co (tungsten carbide-cobalt) composites are widely used in industry, wear-resistant
parts, and cutting tools. As successful tool materials, WC-Co carbides are widely applied in …

The study investigates the density, phase composition, microstructure and mechanical
properties of ceramics obtained by the Spark Plasma Sintering (SPS). Three groups of …