Precipitation-strengthened Cu alloys with high strength and conductivity (HSC) has become
widespread in the electronic and electrical industries. Although pure Cu exhibits high …

Abstract Cu-1Cr-0.1 Zr (wt%) alloy strips were fabricated by a two-stage cryorolling and an
intermediate aging treatment. The microstructures, mechanical/electrical properties and …

The effectiveness of the cryogenic (CT) rolling vis-à-vis room temperature (RT) rolling on
strengthening is significantly affected by stacking fault energy (SFE) and there is an optimum …

The present study investigated the aging precipitation behavior and mechanical, electrical
properties of Cu–15Ni–8Sn alloy affected by cold rolling with different deformations. During …

Hardness and strength values of over 55 copper alloys strengthened by solid solution
strengthening, precipitation hardening, cold working, and dispersion strengthening were …

In order to improve the strength and electrical conductivity of Cu-Ni-Si alloy, the columnar
crystalline C70250 copper alloy strip suffer from two deep cryogenic rolling-aging treatments …

Cu–Cr alloys have been widely used in industrial applications owing to their good
combination of mechanical properties and electrical conductivity. However, the …

Cu–Ti alloys were prepared by accumulative roll bonding-deformation diffusion (ARB-DD)
process. The deformation-aging behavior and the evolution of microstructure and properties …

The precipitation behaviours during the aging process and the corresponding strengthening
mechanism of a Cu-0.4 wt% Sc alloy were systematically investigated in this study. The …

In this study, the structural, electronic, mechanical, and thermodynamic properties of Cu–Ti
intermetallic compounds (Cu 4 Ti, Cu 2 Ti, Cu 3 Ti 2, Cu 4 Ti 3, CuTi, and CuTi 2) were …