In recent years, the severe energy consumption identified in the global power‐transmission
process makes the development of new generation of transmission materials with high …

High-pressure die casting (HPDC) has been extensively used to manufacture aluminum
alloy heat dissipation components in the fields of vehicles, electronics, and communication …

In this paper, several low alloying conductive Al alloys Al-0.5 Fe-0.2 Si, Al-0.5 Mg-0.35 Si, Al-
0.8 Fe-0.2 Cu were selected as the research objects. According to our study, the …

The design of high-performance overhead aluminum wires is challenging, due to the
intrinsic trade-off of strength-ductility and strength-electrical conductivity (EC). The in-situ …

This encyclopedia, written by authoritative experts under the guidance of an international
panel of key researchers from academia, national laboratories, and industry, is a …

Abstract The effect of 0.2 wt% Sc addition on the high temperature strength and
microstructure evolution of Al-11.5 wt% Si-4.0 wt% Cu alloy in different states (as-cast, T6 …

Abstract Hypoeutectic Al-Si alloys exhibit excellent mechanical properties and relatively
good electrical conductivity (EC), and they are often used as overhead transmission …

Aluminum has been used as an alternative to copper for the production of electrical grade
conductors. However, good electrical conductivity with excellent mechanical properties is …

Abstract Hypoeutectic Al-Si alloys are one of common material for overhead transmission
lines. However, electrical conductivity and mechanical property are hard to be improved …

High strength and excellent electrical conductivity of Al alloys are highly desired in the field
of power transmission. However, these two factors are usually contradictory in metallic …