Dislocation-induced β'precipitation behavior and strength-ductility synergistic enhancement in Mg-Gd-Y-Zr-Ag alloy
Y Huang, C Liu, S Jiang, Y Ma, Y Wan… - Journal of Alloys and …, 2023 - Elsevier
In this work, the microstructure, precipitation behavior and mechanical properties of a multi-
directional forged and age-treated Mg-8.9 Gd-1.8 Y-0.5 Zr-0.2 Ag (wt%) alloy were …
directional forged and age-treated Mg-8.9 Gd-1.8 Y-0.5 Zr-0.2 Ag (wt%) alloy were …
Effect of unidirectional rolling and cross-rolling on microstructure and mechanical anisotropy of Mg-Gd-Y-Ag-Zr plates
H Chen, Y Han, C Liu, Z Chen - Journal of Alloys and Compounds, 2023 - Elsevier
Abstract Mg-10Gd-2Y-0.4 Ag-0.4 Zr (wt%) alloy plates are prepared by Unidirectional
Rolling (UR) and Cross-Rolling (CR). The effects of these two methods on the microstructure …
Rolling (UR) and Cross-Rolling (CR). The effects of these two methods on the microstructure …
[HTML][HTML] Simple shear extrusion versus equal channel angular pressing: A comparative study on the microstructure and mechanical properties of an Mg alloy
Two severe plastic deformation (SPD) techniques of simple shear extrusion (SSE) and equal
channel angular pressing (ECAP) were employed to process an extruded Mg− 6Gd− 3Y …
channel angular pressing (ECAP) were employed to process an extruded Mg− 6Gd− 3Y …
[HTML][HTML] Superplastic deformation behavior of the as-extruded AZ110 magnesium alloy with La-rich Mish metal addition
Q Liao, Q Le, X Chen, X Li, YC Jiang, L Ma… - Journal of Materials …, 2020 - Elsevier
Tensile test at high temperature and electron backscatter diffraction (EBSD) techniques were
combined to investigate the deformation behavior and microstructure evolution of the as …
combined to investigate the deformation behavior and microstructure evolution of the as …
Microstructural evolution and superplastic behavior of a fine-grained Mg− Gd− Y− Ag alloy processed by simple shear extrusion
Two magnesium alloys with the nominal compositions of Mg− 6Gd− 3Y (GW63) and Mg−
6Gd− 3Y− 1Ag (GW63− 1Ag) were hot extruded and then processed by 6 passes of the …
6Gd− 3Y− 1Ag (GW63− 1Ag) were hot extruded and then processed by 6 passes of the …
Corrosion behavior of Mg-5.7 Gd-1.9 Ag Mg alloy sheet
B Li, J Sun, B Xu, G Wu - Journal of Alloys and Compounds, 2022 - Elsevier
This paper focuses on the corrosion behavior of Mg-5.7 Gd-1.9 Ag alloy sheets with high
strength-ductility synergy in the 3.5 wt% NaCl solution prepared by a combined route of …
strength-ductility synergy in the 3.5 wt% NaCl solution prepared by a combined route of …
Developing a high-performance Mg-5.7 Gd-1.9 Ag wrought alloy via hot rolling and aging
J Sun, B Li, J Yuan, X Li, B Xu, Z Yang, J Han… - Materials Science and …, 2021 - Elsevier
Developing wrought Mg alloys with excellent mechanical properties and their profiles act a
pivotal part in extending Mg alloys' applications. Here, an Mg-5.7 Gd-1.9 Ag wt.% alloy sheet …
pivotal part in extending Mg alloys' applications. Here, an Mg-5.7 Gd-1.9 Ag wt.% alloy sheet …
Current progress of research on heat-resistant Mg alloys: A review
H Yang, W Xie, J Song, Z Dong, Y Gao, B Jiang… - International Journal of …, 2024 - Springer
With the increasing attention received by lightweight metals, numerous essential fields have
increased requirements for magnesium (Mg) alloys with good room-temperature and high …
increased requirements for magnesium (Mg) alloys with good room-temperature and high …
Microstructure evolution and mechanical properties of Mg-Gd-Y-Ag-Zr alloy fabricated by multidirectional forging and ageing treatment
B Wang, C Liu, Y Gao, S Jiang, Z Chen… - Materials Science and …, 2017 - Elsevier
Abstract Mg-8.0 Gd-3.7 Y-0.3 Ag-0.4 Zr (wt%) bulk sample with exceptional high strength is
successfully fabricated by multidirectional forging (MDF) and subsequent ageing treatment …
successfully fabricated by multidirectional forging (MDF) and subsequent ageing treatment …
Precipitate characteristics and their effects on the mechanical properties of as-extruded Mg-Gd-Li-Y-Zn alloy
Z Yu, X Xu, A Mansoor, B Du, K Shi, K Liu, S Li… - Journal of Materials …, 2021 - Elsevier
In this work, a high-performance Mg-8.4 Gd-4.4 Li-3.5 Y-1.4 Zn (wt%) alloy was successfully
prepared by low-temperature hot extrusion. The studied alloy has a TYS of 295±1 MPa and …
prepared by low-temperature hot extrusion. The studied alloy has a TYS of 295±1 MPa and …