Laser-induced incandescence for non-soot nanoparticles: recent trends and current challenges
Laser-induced incandescence (LII) is a widely used combustion diagnostic for in situ
measurements of soot primary particle sizes and volume fractions in flames, exhaust gases …
measurements of soot primary particle sizes and volume fractions in flames, exhaust gases …
[HTML][HTML] Nanofabrication by thermal plasma jets: From nanoparticles to low-dimensional nanomaterials
Current fabrication of nanomaterials is facing the following two challenges: high selectivity
toward specific chemical compositions or morphologies and their scalable production. This …
toward specific chemical compositions or morphologies and their scalable production. This …
Unified simulation of different modes in atmospheric pressure DC discharges in nitrogen
AI Saifutdinov - Journal of Applied Physics, 2021 - pubs.aip.org
A self-consistent unified model of direct current (DC) gas discharges in molecular gases
describing the processes both in the discharge gap and in the electrodes is developed …
describing the processes both in the discharge gap and in the electrodes is developed …
Pulsed anodic arc discharge for the synthesis of carbon nanomaterials
Pulsed arc discharges can improve arc control and tailor the ablation process in the
production of 1D and 2D nanostructures from carbon anodes. In this work, low-dimensional …
production of 1D and 2D nanostructures from carbon anodes. In this work, low-dimensional …
Generation of carbon nanowhiskers, nanotips, and nanodots by controlling plasma environment: Ion energy and radical effects
Carbon nanotips and nanowhiskers were produced through etching of an amorphous
carbon layer (ACL) by controlling the plasma environment. Discharge types and different …
carbon layer (ACL) by controlling the plasma environment. Discharge types and different …
Characterization of plasma and gas-phase chemistry during boron-nitride nanomaterial synthesis by laser-ablation of boron-rich targets
In this work, solid targets made from boron and boron nitride (BN) materials are ablated by a
nanosecond pulsed laser at sub-atmospheric pressures of nitrogen and helium gases. The …
nanosecond pulsed laser at sub-atmospheric pressures of nitrogen and helium gases. The …
Few-layer flakes of Molybdenum Disulphide produced by anodic arc discharge in pulsed mode
Here, the synthesis of Molybdenum Disulphide (MoS 2) flakes by means of anodic
atmospheric arc discharge is reported for the first time. The vertical electrode configuration …
atmospheric arc discharge is reported for the first time. The vertical electrode configuration …
Importance of Gas Heating in Capacitively Coupled Radiofrequency Plasma-assisted Synthesis of Carbon Nanomaterials
In pursuit of diamond nanoparticles, a capacitively-coupled radio frequency (CCRF) flow-
through plasma reactor was operated with methane argon gas mixtures. Signatures of the …
through plasma reactor was operated with methane argon gas mixtures. Signatures of the …
Nucleation in plasma: Catalyst nucleation rate in plasma systems used for production of nanoparticles
V Nemchinsky - Journal of Applied Physics, 2024 - pubs.aip.org
According to the classic theory of nucleation around a charged particle, dipoles induced in
the particle's neighbors by the charged nucleation center decrease the electric field around …
the particle's neighbors by the charged nucleation center decrease the electric field around …
Evolution of anodic erosion components and heat transfer efficiency for W and W80Ag20 in atmospheric-pressure arcs
Y Cui, Y Wu, C Niu, M Rong, H Sun, L Niu… - Journal of Physics D …, 2020 - iopscience.iop.org
Based on the in situ diagnostic system and the digital image post-processing technique,
quantifications of the anodic erosion components and heat transfer efficiency for tungsten …
quantifications of the anodic erosion components and heat transfer efficiency for tungsten …