Abstract Al-Mg-Si alloys with high strength and good corrosion resistance are regarded as
desirable materials for all-aluminum vehicles. However, the traditional trial-and-error …

In order to improve the corrosion and heat resistance of Al-Mg-Si alloy conductor materials,
Ce, Sc, Y and Zr were added in Al-Mg-Si alloy to regulate the microstructure. The Al-Mg-Si …

The microstructure and intergranular corrosion have been studied in an extruded and aged
Al-Mg-Si alloy doped with 0.05 wt% Cu after immersing the material in an acidified salt …

The intergranular corrosion in a partially recrystallized 2A97 Al-Cu-Li alloy at various
tempers was investigated. Immersion tests showed that the T6-tempered alloy was …

Abstract 6xxx series (Al–Mg–Si) alloys are generally known to be greatly susceptible to
localized corrosion, which is closely related to the presence of coarse intermetallic …

This article deals with the corrosion behavior of friction stir processed aluminum-magnesium
alloys undergoing electrochemical measurements, including potentiodynamic polarization …

A high-strength and anti-intergranular corrosion (IGC) Al-6.8 Zn-2.2 Mg-Sc-Zr alloy (AS
alloy) was designed, and the effects of Sc addition and Cu removal on the microstructure …

The effect of trace level Cu content on intergranular corrosion in an acidified salt solution
has been systematically studied in four AA6082-T6 extrusions containing 0.001, 0.02, 0.03 …

Abstract The Al-Cu-Mg-Ag alloy with a low Cu/Mg ratio was hot rolled at different
temperatures (410° C, 440° C, 470° C) following by solution and under-aged treatment to …

In this study, the effects of continuous heating aging on the microstructure, mechanical
properties, and corrosion resistance of a 6013 aluminum alloy were investigated through …