Phase separation in metallic glasses
DH Kim, WT Kim, ES Park, N Mattern… - Progress in Materials …, 2013 - Elsevier
Phase separation phenomena in metallic glass systems are reviewed. First, a brief
introduction to the enhanced glass forming ability and the phase separation in metallic glass …
introduction to the enhanced glass forming ability and the phase separation in metallic glass …
Mechanical properties of bulk metallic glasses and composites
The development of bulk metallic glasses and composites for improving the mechanical
properties has occurred with the discovery of many ductile metallic glasses and glass matrix …
properties has occurred with the discovery of many ductile metallic glasses and glass matrix …
Crystallization-induced plasticity of Cu–Zr containing bulk amorphous alloys
This study examined the parameter governing the plasticity observed in various Cu–Zr
containing monolithic amorphous alloys. All the alloys were fully amorphous in their as-cast …
containing monolithic amorphous alloys. All the alloys were fully amorphous in their as-cast …
Understanding of crystallization behaviors in laser 3D printing of bulk metallic glasses
In 3D printing of bulk metallic glasses (BMGs) by selective laser melting (SLM), partial
crystallization normally occurs in heat-affected zones (HAZs), which significantly deteriorates …
crystallization normally occurs in heat-affected zones (HAZs), which significantly deteriorates …
Phase separation in Cu43Zr43Al7Ag7 bulk metallic glass
The chemical inhomogeneity in Cu43Zr43Al7Ag7 bulk metallic glass has been investigated
using a three-dimensional atom probe to understand the enhanced plasticity under …
using a three-dimensional atom probe to understand the enhanced plasticity under …
New Cu–Zr-based bulk metallic glasses with large diameters of up to 1.5 cm
Q Zhang, W Zhang, A Inoue - Scripta materialia, 2006 - Elsevier
Cu–Zr-based bulk glassy alloys are synthesized with high glass-forming ability in a Cu42−
xZr42+ xAg8Al8 system by copper mold casting. Bulk glassy alloys with a diameter of 10mm …
xZr42+ xAg8Al8 system by copper mold casting. Bulk glassy alloys with a diameter of 10mm …
Shear bands in metallic glasses: Size effects on thermal profiles
DB Miracle, A Concustell, Y Zhang, AR Yavari… - Acta Materialia, 2011 - Elsevier
The characteristic dimensions of the hot, liquid zone behind a moving shear-band front in a
metallic glass are analyzed. In addition to the expected dependence on material constants …
metallic glass are analyzed. In addition to the expected dependence on material constants …
The effect of nanocrystallization and free volume on the room temperature plasticity of Zr-based bulk metallic glasses
To understand the mechanism of the room temperature plasticity of bulk metallic glasses
(BMGs), microstructure observations, density measurements and positron annihilation …
(BMGs), microstructure observations, density measurements and positron annihilation …
Recent progress in quantifying glass-forming ability of bulk metallic glasses
The γ parameter proposed by the authors has prompted a lot of new interests in quantifying
glass-forming ability (GFA) of bulk metallic glasses (BMGs). As a result, many different GFA …
glass-forming ability (GFA) of bulk metallic glasses (BMGs). As a result, many different GFA …
Plasticity of a TiCu-based bulk metallic glass: Effect of cooling rate
J Shen, YJ Huang, JF Sun - Journal of Materials Research, 2007 - cambridge.org
Compressive deformation was experimentally investigated for Ti41. 5Cu42. 5Zr2. 5Hf5Ni7.
5Si1 bulk metallic glass (BMG) fabricated at different cooling rates. It was found that the …
5Si1 bulk metallic glass (BMG) fabricated at different cooling rates. It was found that the …