Development of low-cost titanium alloys: A chronicle of challenges and opportunities
MO Bodunrin, LH Chown, JA Omotoyinbo - Materials Today: Proceedings, 2021 - Elsevier
The production of titanium alloys became fully commercialized in the 1950s and that was
precisely 145 years since titanium ores, ilmenite and rutile were first discovered. In the …
precisely 145 years since titanium ores, ilmenite and rutile were first discovered. In the …
Modelling of the hot deformation behaviour of a titanium alloy using constitutive equations and artificial neural network
J Zhao, H Ding, W Zhao, M Huang, D Wei… - Computational Materials …, 2014 - Elsevier
Hot deformation characteristics of a Ti600 titanium alloy were investigated by a Gleeble
1500D thermo-mechanical test simulator over the temperature range from 760 to 920° C and …
1500D thermo-mechanical test simulator over the temperature range from 760 to 920° C and …
Study of dynamic recrystallization in a Ni-based superalloy by experiments and cellular automaton model
The hot compressive behaviors of a typical Ni-based superalloy are investigated by hot
compression tests under the strain rates of 0.001–1 s− 1 and deformation temperatures of …
compression tests under the strain rates of 0.001–1 s− 1 and deformation temperatures of …
Optimization of hybrid manufacturing process combining forging and wire-arc additive manufactured Ti-6Al-4V through hot deformation characterization
AK Maurya, JT Yeom, SW Kang, CH Park… - Journal of Alloys and …, 2022 - Elsevier
Recently, the hybrid method has been developed in which wire and arc additive
manufacturing (WAAM) use to produce the near net shape preform for the single-step hot …
manufacturing (WAAM) use to produce the near net shape preform for the single-step hot …
Hot tensile deformation behaviors and constitutive model of an Al–Zn–Mg–Cu alloy
The hot tensile deformation behaviors of an Al–Zn–Mg–Cu alloy are studied by uniaxial
tensile tests under the deformation temperature of 340–460° C and strain rate of 0.01–0.001 …
tensile tests under the deformation temperature of 340–460° C and strain rate of 0.01–0.001 …
New constitutive model for high-temperature deformation behavior of inconel 718 superalloy
Hot deformation behavior of an aged inconel 718 superalloy is investigated by isothermal
compression tests over wide ranges of strain rate and deformation temperature. In this study …
compression tests over wide ranges of strain rate and deformation temperature. In this study …
Prediction of machining-induced phase transformation and grain growth of Ti-6Al-4 V alloy
Z Pan, SY Liang, H Garmestani, DS Shih - The International Journal of …, 2016 - Springer
The high-speed machining process can significantly influence the microstructure of the
machined surface in titanium alloy. A physics-based finite element method is proposed for …
machined surface in titanium alloy. A physics-based finite element method is proposed for …
Effects of initial aging time on processing map and microstructures of a nickel-based superalloy
Hot compressive deformation behaviors of the aged nickel-based superalloy are studied
under the deformation temperature range of 920–1040° C and strain rate range of 0.001–1 …
under the deformation temperature range of 920–1040° C and strain rate range of 0.001–1 …
Hot deformation behaviour of Ti alloys: A review on physical simulation and deformation mechanisms
Titanium and its alloys, owing to their properties like high strength, toughness, corrosion
resistance and thermal stability, are employable in various engineering and medical …
resistance and thermal stability, are employable in various engineering and medical …
The high-temperature deformation behavior of a novel near-α titanium alloy and hot-forging based on the processing map
Y Su, F Kong, FH You, X Wang, Y Chen - Vacuum, 2020 - Elsevier
Limited by the composition, the service temperature of high-temperature titanium alloys have
been restricted to 600° C for many years. In this study, a self-designed Ti–6Al–3Sn–10Zr …
been restricted to 600° C for many years. In this study, a self-designed Ti–6Al–3Sn–10Zr …