The main objective of this work is to experimentally investigate and statistically evaluate the
effects of the milling parameters on surface roughness (Ra) and flank wear (Vb) in the …

In this study, the effect of the microstructure, hardness, and cutting speed on main cutting
force and surface roughness in medium carbon microalloyed steel cooled in different …

Deneysel çalışmada, St-37 malzemesinin lazer kesme işleminde yüzey pürüzlülüğünü (Ra)
ve kerf genişliğini (kW) etkileyen parametreler deneysel ve istatiksel olarak incelenmiştir …

A study was conducted on the machinability of CoCrMo material, which is widely used in the
health-care industry as an implant material. When it came to dry machining testing, three …

Purpose: Al 6061 alloy is used in many different areas in the manufacturing sector. However,
in the majority of machinability studies in the literature, it was revealed that shear forces …

In this study, using variables such as load and sliding speed, which are effective parameters
on abrasive wear, the amount of wear on the bearing material, friction coefficients, and trace …

Cutting forces in turning have dramatic impact on the cutting stability, tool wear index and
surface quality. Machinability of cast iron is important as per this material is served as the …

Yapılan çalışmada, AISI 310 paslanmaz sac malzemesinin lazer tezgâhında kesilmesiyle
kesme parametrelerinin yüzey pürüzlülüğü ve kerf genişliğine etkileri araştırılmıştır. Lazer …

Bu çalışma, Eriyik Yığma Modelleme (FDM) teknolojisi kullanılarak üretilen numunelerin
yüzey kalitesi ve çekme dayanımı üzerinde ABS, PLA ve PETG filamentlerin ve baskı …

Bu çalışmada; endüstriyel sektörde tercih edilmesi yaygın olan AL1050 (% 99, 53 ticari
saflıkta) malzemenin, çekme hızı (zımba hızı), numune eni ve zımba çapı değişiminin …