The need for a more sustainable and accessible source of energy is increasing as human
society advances. The use of different metallic materials and their challenges in current and …

Considering the application of cryogenic treatment in aerospace manufacturing field, the hot
rolled 7055 Al–Zn–Mg–Cu alloy thick plate was selected in order to solve its mechanical …

Al alloys have long been of interest to the aerospace community, due to their modest specific
strength, ease of manufacture, and low cost. In recent years, with the rapid development of …

The aim of this study is to investigate the effects of cryogenic process (CP) on the properties
of 2024-T6 aluminum alloy. So, samples were held at− 40° C medium for 24 h in CP after …

In the present work, it is experimented to reinforce duralumin powder (3 to 7 wt%.) into
Al7075 matrix by stir casting technique. Since matrix and reinforcement both have almost …

The need for a more sustainable and accessible source of energy is increasing as human
society advances. The use of different metallic materials and their challenges in current and …

As product structure becomes more and more complex, the fault mode presents a diversified
trend, and it is more difficult to determine the causes of system failure for a complex product …

This study investigates the turning of aluminium alloy 6063 to optimise the material removal
rate (MRR) and surface roughness (Ra) simultaneously. L27 Taguchi's orthogonal …

Al alloys have long been of interest to the aerospace community, due to their modest specific
strength, ease of manufacture, and low cost. In recent years, with the rapid development of …