Selective laser melted parts easily accumulate a large amount of residual stress due to their
rapid heating and cooling, which is deleterious to their mechanical properties and limits their …

TiC-reinforced AZ91D magnesium alloy composites were synthesized through the in situ
reaction between an AZ91D melt and Ti-C-Al preforms. The microstructural evolution …

The effect of compression ratio on the microstructure evolution of semisolid AZ91D
magnesium alloy manufactured by strain induced melt activation (SIMA) process was …

The effects of isothermal process parameters on the microstructure evolution of semisolid
AZ91D alloy produced by strain-induced melt activation (SIMA) were investigated using the …

The effect of predeformation on the α-Mg grains in the AZ91D alloys was investigated in
different stages during the semisolid processing. The result showed that, with the increase of …

Repetitive upsetting-extrusion (RUE) was introduced into the strain induced melt activation
(SIMA) process. The semi-solid feedstock of AZ91D magnesium alloy with superior …

An investigation on the electrochemical behavior of P110 steel loaded with different tensile
stresses in CO 2 corrosion environment was conducted using electrochemical measurement …

In this study, simultaneous effects of modified strain induced melt activation (M-SIMA)
process and addition of Al-5Ti-1B chemical grain refiner on the casting defects …

The microstructural evolution of A356 aluminum alloy during reheating was investigated. In
this study, thermomechanical treatment (TMT) method was carried out to produce feed stock …

The microstructural evolution of AZ61 magnesium alloy predeformed by equal channel
angular extrusion (ECAE) during semisolid isothermal treatment (SSIT) was investigated by …