Nisingle bondCo alloy electrodeposits have been widely employed in industry due to their
good corrosion and wear resistance, high mechanical strength, moderate thermal …

Among various methods used for protecting the industrial components from wear/abrasion
failures, electrodeposition has attracted considerable attention in recent years because of its …

Ni-W/SiC nanocomposite coatings were systematically deposited at varying pulse
parameters and subsequently characterized using SEM, XRD, TEM for surface morphology …

Ni–SiC nano-composite coatings with different contents of SiC nano-particulates were
prepared by means of the conventional electrodeposition in a nickel-plating bath containing …

Pure nickel and nickel matrix composite deposits containing nano-SiC particles were
produced under both direct and pulse current conditions from an additive-free nickel Watts' …

The dry sliding wear behavior of Al 5252 alloy and its composites reinforced with nanometric
or micrometric SiC particles is studied. The wear tests were conducted on hot extruded …

Micro-and nano-sized SiC particles were codeposited with nickel by electrolytic plating from
a nickel sulfamate bath and the effects of plating parameters such as pH of the plating bath …

Nickel matrix composite coatings reinforced with sub-microsized Al2O3 particles were
produced by pulse electrodeposition and the effect of pulse frequency on the microstructure …

A new strategy of CeO 2 nanoparticles integration with GO nanosheets (CeO 2@ GO
composites) was adopted for reinforcing Ni-P coating on Mg-Li alloys. Besides, the effect of …

Ni–W/diamond composite coatings were obtained by electrodeposition from a Ni–W plating
bath containing suspended diamond particles. The influences of plating parameters …