Magnesium (Mg) and its alloys have been widely explored as a potential biodegradable
implant material. However, the fast degradation of Mg‐based alloys under physiological …

The present work aims to produce Multiwalled Carbon Nanotube (MWCNT) and Graphene
Nanoplatelets (GNPs) reinforced AlSiCuNiMg alloy matrix composites via stir casting. The …

The thermal conductivity of Mg-Sm binary alloys is relatively poor due to the severe lattice
distortion introduced by the high solid solubility Sm atom in the Mg matrix, which restricts …

The production of magnesium alloys by the powder metallurgy (P/M) method is difficult and
troublesome. An alternative production method with easy usability is therefore required, and …

Abstract Magnesium-Aluminium-Silicon alloys with varying concentrations of Al (2–9 wt%),
and 1 wt% Si are made using a fluxless method under an inert atmosphere in order to …

The study of microstructures for the accurate control of material properties is of industrial
relevance. Identification and characterization of microstructural properties by manual …

The current work deals with the precipitation behaviors and mechanical properties of the
high zinc content of the Mg-Zn-Cu system alloys using gravity casting. Differential scanning …

In this study, the effect of 3 wt.% of Y addition on the wear behavior of ZK60 extruded alloy
was investigated using both experiment and simulation. First, a pin-on-disc tribometer was …

The current investigation involved casting the Mg–2.2 Gd–2.2 Zn–0.2 Ca (wt%) alloy
(GZX220) through permanent mold casting, followed by homogenization at 400° C for 24 h …

In the present work, the effect of squeezing at 100 MPa during AZ91 Mg alloy casting has
been studied, where the microstructure, texture, and mechanical properties of gravity die …