Protic ionic liquids as next-generation proton exchange membrane materials: Current status & future perspectives
The development of protic ionic liquids (PILs) in proton exchange membrane has drawn
significant interest. The intrinsic properties of high thermal stability and proton conductivity of …
significant interest. The intrinsic properties of high thermal stability and proton conductivity of …
Poly (ionic liquid)-polyethylene oxide semi-interpenetrating polymer network solid electrolyte for safe lithium metal batteries
Solid-state polymer electrolyte with high ionic conductivity and electrochemical stability is
desirable for lithium metal batteries. A poly (ionic liquid)-polyethylene oxide semi …
desirable for lithium metal batteries. A poly (ionic liquid)-polyethylene oxide semi …
Dielectric relaxations and conductivity of cross-linked PVA/SSA/GO composite membranes for fuel cells
C González-Guisasola, A Ribes-Greus - Polymer Testing, 2018 - Elsevier
Composite membranes obtained from Poly (vinyl Alcohol)(PVA) with sulfosuccinic acid
(SSA) as crosslinking agent, and two different proportions of graphene oxide (GO), were …
(SSA) as crosslinking agent, and two different proportions of graphene oxide (GO), were …
Humidity sensors based on cross-linked poly (ionic liquid) s for low humidity sensing
Y Yu, Z Ma, X Miao, Y Cui, Y Song, S Liu, T Fei… - Sensors and Actuators B …, 2024 - Elsevier
Low humidity detection has been a great challenge in the field of humidity sensing. In recent
years, polyelectrolytes have been proven to be promising materials for highly sensitive …
years, polyelectrolytes have been proven to be promising materials for highly sensitive …
Dielectric and Thermal Properties of PEO/PVDF Blend Doped with Different Concentrations of Li4Ti5O12 Nanoparticles
Abstract Poly (ethylene oxide)(PEO) and poly (vinylidene fluoride)(PVDF) films of
compositions (50/50, 40/60, 30/70 and 20/80 wt/wt%) are prepared by casting technique. X …
compositions (50/50, 40/60, 30/70 and 20/80 wt/wt%) are prepared by casting technique. X …
Polymer/liquid crystal nanocomposites for energy storage applications
High‐dielectric constant (high‐K) polymer nanocomposites based on nematic liquid crystals
and CaCu3Ti4O12 (CCTO) nanoparticles have been prepared. The host matrix is polymer …
and CaCu3Ti4O12 (CCTO) nanoparticles have been prepared. The host matrix is polymer …
Structural, impedance and electrochemical double-layer capacitor characteristics of improved number density of charge carrier electrolytes employing potato starch …
Potato starch (PS)/graphene oxide (GO) blend–based solid polymer electrolyte has been
doped with lithium trifluoromethanesulfonate (LiCF 3 SO 3) via casting method. Lithium …
doped with lithium trifluoromethanesulfonate (LiCF 3 SO 3) via casting method. Lithium …
Influence of solid polymer electrolyte preparation methods on the performance of (PEO–PMMA)–LiBF4 films for lithium-ion battery applications
P Dhatarwal, RJ Sengwa - Polymer Bulletin, 2018 - Springer
Classical solution-cast and ultrasonic–microwave-irradiated solution-cast methods have
been used for the preparation of solid polymer electrolyte (SPE) films comprising polymer …
been used for the preparation of solid polymer electrolyte (SPE) films comprising polymer …
Study on the properties of multi-walled carbon nanotubes reinforced poly (vinyl alcohol) composites
EM Sadek, DE El-Nashar, AA Ward… - Journal of Polymer …, 2018 - Springer
Nanocomposite films based on polyvinyl alcohol (PVA) and multi-walled carbon nanotubes
(MWCNTs) at different weight ratios (ie 0.0, 0.5, 1.0, 1.5, 2.0 wt%), were prepared by …
(MWCNTs) at different weight ratios (ie 0.0, 0.5, 1.0, 1.5, 2.0 wt%), were prepared by …
Radiation induced effect on structural and dielectric properties of polyaniline incorporation into polyvinylidene fluoride/barium titanate ternary composites
The solution casting approach was used to successfully manufacture polyvinylidene fluoride-
barium titanate (PVDF-BT) films doped with varied ratios of polyaniline (PANI)(0, 0.5, 1, 2 …
barium titanate (PVDF-BT) films doped with varied ratios of polyaniline (PANI)(0, 0.5, 1, 2 …