Radiation sensor based on thin-film CdTe/CdS device structure and its radiation resistance under high-intensity hydrogen plasma
AV Meriuts, MM Kharchenko, GS Khrypunov… - Journal of Applied …, 2022 - pubs.aip.org
In this work, the ability of CdTe/CdS thin-film device structures prepared by the hot-wall
method to detect ionizing radiation was investigated. The samples were fabricated with a …
method to detect ionizing radiation was investigated. The samples were fabricated with a …
Impact of pulsed deuterium plasma irradiation on dual-phase tungsten alloys
S Tõkke, T Laas, J Priimets, V Mikli… - Fusion Engineering and …, 2021 - Elsevier
The morphological and structural changes of two different dual-phase tungsten alloy (either
3% or 5% of an added mixture of Fe and Ni) are investigated after deuterium plasma …
3% or 5% of an added mixture of Fe and Ni) are investigated after deuterium plasma …
Measurement of plasma stream velocity in a pulsed plasma accelerator
The measurement of plasma stream velocity in a coaxial pulsed plasma accelerator using
two pairs of double plate probe (DPP) is reported in this article. The device produces a …
two pairs of double plate probe (DPP) is reported in this article. The device produces a …
Mechanisms of crack generation in high-pure tungsten exposed to high power density plasma
The mechanisms of crack formation in the tungsten divertor plates irradiated by hydrogen
plasma under ITER-type steady-state and transient events are investigated. The stresses …
plasma under ITER-type steady-state and transient events are investigated. The stresses …
Parameters of hydrogen plasma streams in QSPA-M and their dependence on external magnetic field
MS Ladygina, YV Petrov, DV Yeliseev… - … атомной науки и …, 2021 - dspace.nbuv.gov.ua
Present experimental studies are aimed at analysis of hydrogen plasma stream parameters
in various working regimes of QSPA-M operation. Temporal distributions of plasma electron …
in various working regimes of QSPA-M operation. Temporal distributions of plasma electron …
[PDF][PDF] Comparison of multifractal parameters of surface defects and non-defects.
M Martsepp, T Laas, S Tõkke, J Priimets… - Estonian Journal of Earth …, 2023 - kirj.ee
In this study, three different materials (pure tungsten and two tungsten alloys with Fe and Ni
dopants), which have been irradiated with a high-temperature deuterium plasma of 20, 25 …
dopants), which have been irradiated with a high-temperature deuterium plasma of 20, 25 …
Ion beam figuring with focused anode layer thruster
This work presents the peculiarities of cone ion beam formation with a focused thruster with
anode layer (TAL) and its application to silicon carbide (SiC) ion beam figuring. Modeling …
anode layer (TAL) and its application to silicon carbide (SiC) ion beam figuring. Modeling …
Damaging of pure tungsten with different microstructure under sequential QSPA and LHD plasma loads
SS Herashchenko, OV Byrka… - … атомной науки и …, 2020 - dspace.nbuv.gov.ua
The cracking thresholds were evaluated for tungsten samples with different microstructure in
the course of QSPA Kh–50 repetitive plasma loads. No damage has been observed on the …
the course of QSPA Kh–50 repetitive plasma loads. No damage has been observed on the …
of the estonian academy of sciences
M Martsepp, T Laas, S Tõkke, J Priimets, V Mikli - kirj.ee
In this study, three different materials (pure tungsten and two tungsten alloys with Fe and Ni
dopants), which have been irradiated with a high-temperature deuterium plasma of 20, 25 …
dopants), which have been irradiated with a high-temperature deuterium plasma of 20, 25 …
X-ray diffraction study of a tungsten-based material for the first wall of ITER
A Kozushkina, SI Pavlov, AV Voronin… - Journal of Physics …, 2020 - iopscience.iop.org
Methods of X-ray diffraction (XRD), Scanning Electron Microscopy and Energy Dispersive X-
ray Spectroscopy were applied to POLEMA W sample after He plasma irradiation. The W …
ray Spectroscopy were applied to POLEMA W sample after He plasma irradiation. The W …