Sliding tribocorrosion behaviours of AISI 316 stainless steel were investigated against
alumina ball in natural seawater environment (SWE) under 5 N loads. OCP (open circuit …

In-depth understanding of tribocorrosion of 316L SS in deep-sea is important for deep-sea
application. In this work, the tribocorrosion behaviors of 316L stainless steel in 3.5 wt …

The tribocorrosion behavior as well as the corrosion-wear interaction of Monel 400 alloy in
seawater were investigated under varied loads. An abnormal antagonistic effect of corrosion …

The remote location and position of offshore wind turbine structures severely limits the
application of in situ corrosion detection methods such as ultrasonic, acoustic emission, and …

Abstract Tribocorrosion of Ti6Al4 V alloy has been investigated in 3.5 wt.% NaCl solution
under simulated deep-sea environment. The results demonstrate tribocorrosion rate …

Additive technologies provide a means for repair of various failure modes associated with
material degradation occurring during use in aggressive environments. Possible repair …

The effects of deep rolling parameters, particularly, work speed and cooling conditions (dry
and cryogenic) on the surface integrity of AISI 304L machined samples and their further …

The corrosion resistance of laser powder bed fusion (LPBF) 304L stainless steel (SS) in 3.5
wt% NaCl solution was evaluated at room temperature through potentiodynamic polarization …

A new passivation technology for growing a self-organized nanoporous oxide layer with a
honeycomb morphology on Type 304 stainless steel is proposed. FESEM, cross-sectional …

As-built surface morphology and texture of Additively Manufactured (AM) metal parts reduce
their mechanical and corrosion properties. One chemically accelerated vibratory finishing …