Millimeter-wave tissue diagnosis: The most promising fields for medical applications
F Topfer, J Oberhammer - IEEE Microwave Magazine, 2015 - ieeexplore.ieee.org
At the end of the 19th century, researchers observed that biological substances have
frequency-dependent electrical properties and that tissue behaves" like a capacitor"[1] …
frequency-dependent electrical properties and that tissue behaves" like a capacitor"[1] …
Silicon Micromachined Canonical -Plane and -Plane Bandpass Filters at the Terahertz Band
CA Leal-Sevillano, TJ Reck… - IEEE Microwave and …, 2013 - ieeexplore.ieee.org
In this letter, several bandpass filters operating in the WR-1.5 band (500 to 750 GHz) are
presented. The deep reactive ion etching (DRIE) silicon micromachining process is used for …
presented. The deep reactive ion etching (DRIE) silicon micromachining process is used for …
A micromachined dual-band orthomode transducer
CA Leal-Sevillano, Y Tian, MJ Lancaster… - IEEE transactions on …, 2013 - ieeexplore.ieee.org
In this paper, an orthomode transducer (OMT) for dual-band operation and optimized for
stacked micromachined layers implementation is presented. The proposed design avoids …
stacked micromachined layers implementation is presented. The proposed design avoids …
60-GHz air substrate leaky-wave antenna based on MEMS micromachining technology
In this paper, a 60-GHz air substrate leaky-wave antenna based on microelectromechanical
system (MEMS) bulk micromachining is proposed. Using penetration dry etching and gold …
system (MEMS) bulk micromachining is proposed. Using penetration dry etching and gold …
Compact terahertz instruments for planetary missions
Using newly developed silicon micromachining technology that enables low-mass and
highly integrated receivers, we are developing a state-of-the-art terahertz radiometer …
highly integrated receivers, we are developing a state-of-the-art terahertz radiometer …
Silicon micromachined waveguide quadrature-hybrid coupler at terahertz frequency band
S Liu, J Hu, Y Zhang, L Li, W Zhao, R Xu… - Journal of Infrared …, 2015 - Springer
A waveguide quadrature-hybrid coupler operating from 350 to 410 GHz is designed and
fabricated using the deep reactive ion etching (DRIE) silicon micromachining technique. The …
fabricated using the deep reactive ion etching (DRIE) silicon micromachining technique. The …
Micromachined terahertz waveguide band-pass filters
J Hu, S Liu, Y Zhang, R Xu - 2017 IEEE MTT-S International …, 2017 - ieeexplore.ieee.org
Three waveguide band-pass filters are designed based on three different resonant cavity
structures, operating at WR-2.2 (0.33~ 0.5 THz), WR-1.5 (0.5~ 0.75 THz) and WR-1.0 (0.75 …
structures, operating at WR-2.2 (0.33~ 0.5 THz), WR-1.5 (0.5~ 0.75 THz) and WR-1.0 (0.75 …
Transceiver array development for submillimeter-wave imaging radars
KB Cooper, TA Reck, C Jung-Kubiak… - Passive and Active …, 2013 - spiedigitallibrary.org
The Jet Propulsion Laboratory (JPL) is developing compact transceiver arrays housing
discrete GaAs Schottky diodes with integrated waveguides in order to increase the frame …
discrete GaAs Schottky diodes with integrated waveguides in order to increase the frame …
Sub‐Millimeter‐Wave 10 dB Directional Coupler Based on Micromachining Technique
S Liu, J Hu, Y Zhang, Y Liu, T Ren… - International Journal of …, 2015 - Wiley Online Library
A waveguide 10 dB directional coupler operating from 325 GHz to 400 GHz is designed
based on the short‐slot Riblet‐type coupling configuration and fabricated using the deep …
based on the short‐slot Riblet‐type coupling configuration and fabricated using the deep …
[HTML][HTML] Advance Silicon Micromachined Passive Components for High-performance Millimetre and Sub-millimetre wave Systems
M Mehrabi Gohari - 2024 - diva-portal.org
This thesis investigates advanced silicon micromachined passive component design
solutions for high-performance millimeter and submillimeter-wave systems, representing the …
solutions for high-performance millimeter and submillimeter-wave systems, representing the …