Vanadium as an important alloying element in steels was initially associated with the
properties achieved following tempering. Interest in the microstructure was stimulated by the …

With the background of emission peaks and carbon neutrality, light weight has become an
irreversible trend in the development of the automobile industry. It is an inevitable choice to …

DMR-249A is a low carbon microalloyed high-strength low-alloy (HSLA) steel. While DMR-
249A plates of thickness less than 18mm meet the specified room temperature yield strength …

In the present work, on the foundation of Fe–13Cr-4.5 Al–2Mo–1Nb-0.2 Si alloy, FeCrAl
alloys with low Cr content (7, 8, 9 and 10 wt%) and other minor alloying elements (Ta, Zr and …

Abstract The Fe–13Cr–4Al-1.85 Mo-0.85 Nb alloy, as accident-resistant fuel cladding
material in light water reactor (LWR), was prepared by a vacuum induction melting, forging …

Powder-based laser direct metal deposition (DMD), one of the directed energy deposition,
was applied in air and underwater to repair pre-machined NV E690 steel plates. Systematic …

Combining high-resolution transmission electron microscopy (HR-TEM) and 3-dimensional
atom probe tomography (3D-APT), the early stages of nucleation and growth of vanadium …

The effects of Ti additions on the microstructures and mechanical properties of microalloyed
powder metallurgy (PM) steels were investigated. The microstructure of the microalloyed PM …

The microstructure and mechanical properties of a Nb–V microalloyed steel produced by
strip casting in as-coiled and aged conditions were investigated using scanning electron …

In this work, the effect of the sintering temperature on the microstructure and mechanical
properties of Nb-V added powder metallurgy (PM) steels was investigated. The …