Texture, misorientation and mechanical anisotropy in a deformed dual phase stainless steel weld joint
The deformation behavior of a duplex stainless steel weld joint is studied. A detailed texture
analysis shows that the increase of the deformation percentage leads to a reinforcement of …
analysis shows that the increase of the deformation percentage leads to a reinforcement of …
Concurrent microstructural evolution of ferrite and austenite in a duplex stainless steel processed by high-pressure torsion
A duplex stainless steel with approximately equal volume fractions of ferrite and austenite
was processed by high-pressure torsion. Nano-indentation, electron backscatter diffraction …
was processed by high-pressure torsion. Nano-indentation, electron backscatter diffraction …
Three-dimensional shear-strain patterns induced by high-pressure torsion and their impact on hardness evolution
The shear strain imposed on austenite/ferrite duplex stainless steel discs at different stages
of high-pressure torsion (HPT) processing was imaged in plan-view and cross-section using …
of high-pressure torsion (HPT) processing was imaged in plan-view and cross-section using …
Internal stress relief and microstructural evolution by ultrasonic treatment of austeno-ferritic 2205 duplex stainless steel
The microstructure and mechanical properties of 2205 dual-phase pre-strained stainless
steel following the high-power ultrasonic treatment (UST) were investigated. Mitigation of the …
steel following the high-power ultrasonic treatment (UST) were investigated. Mitigation of the …
Activated slip systems and microcrack path in LCF of a duplex stainless steel
MC Marinelli, A El Bartali, JW Signorelli… - Materials Science and …, 2009 - Elsevier
A low-cycle fatigue test was carried out at room temperature on a forged duplex stainless
steel type 25-07 alloyed with 0.17% nitrogen. From EBSD measurements performed before …
steel type 25-07 alloyed with 0.17% nitrogen. From EBSD measurements performed before …
Research on mechanical properties of duplex stainless steel S22053 at elevated temperature and after fire
T Chen, S Fan, Q Xu, K Xu, J Luo, Y Tang - Thin-Walled Structures, 2024 - Elsevier
Stainless steel has advantages such as corrosion resistance, durability and esthetic
appearance, with extensive application prospects in the field of construction engineering. In …
appearance, with extensive application prospects in the field of construction engineering. In …
Effects of structural anisotropy on deformation and damage of a duplex stainless steel under high strain rate loading
Duplex stainless steel (DSS) with pronounced microstructural anisotropy, is shock-loaded
along normal direction, transverse direction and rolling direction to investigate the effects of …
along normal direction, transverse direction and rolling direction to investigate the effects of …
Elastoplastic deformation and damage process in duplex stainless steels studied using synchrotron and neutron diffractions in comparison with a self-consistent …
A Baczmański, Y Zhao, E Gadalińska… - International Journal of …, 2016 - Elsevier
In situ time of flight neutron diffraction and X-ray synchrotron diffraction methods were
applied to measure lattice strains in duplex steels during a tensile test. The experimental …
applied to measure lattice strains in duplex steels during a tensile test. The experimental …
Assessment of the Effect of Residual Stresses Arising in the HAZ of Welds on the Fatigue Life of S700MC Steel
Š Bukovská, J Moravec, P Solfronk, M Pekárek - Metals, 2022 - mdpi.com
Fine-grained steels, which belong to the HSLA (High-Strength Low-Alloy) group of steels,
are increasingly used for parts of statically and dynamically loaded constructions. Due to the …
are increasingly used for parts of statically and dynamically loaded constructions. Due to the …
Is the temperature plateau of a self‐heating test a robust parameter to investigate the fatigue limit of steels with thermography?
R De Finis, D Palumbo, MM Da Silva… - Fatigue & Fracture of …, 2018 - Wiley Online Library
A critical aspect of standard test methods for fatigue characterization is that they do not
provide any information on heat dissipation in the material and involve very expensive …
provide any information on heat dissipation in the material and involve very expensive …