New results about the tribocorrosion resistance and cytotoxicity of FeB-Fe 2 B layer
developed by the powder-pack boriding process on the surface of AISI 316 L steel are …

Layers of iron–nickel Fe-Ni-B-type borides were produced on C45 steel using a new hybrid
treatment variant which combines boriding under glow discharge conditions with galvanic …

In this research work, the effects of pack boriding and induction boriding are investigated
experimentally using dry sliding pin on disc wear test. Pack boriding and induction boriding …

In this study, AISI 316L stainless steel alloy samples were borided with powder-pack
boriding method using Ekabor II powder with the support of a microwave furnace with a …

Surface hardening techniques of steel are of great practical interest for applications in the
petroleum industry. The boriding technique is one of the most economical choices. In this …

In this study, a two-step pack cementation process (preboronizing and then chromizing) was
employed to prepare the B-Cr duplex-alloyed coating on the steel. After the first step of …

The effect of chromizing time on the microstructure and properties of B–Cr duplex-alloyed
coating prepared by a two-step pack-cementation process was investigated. The phases …

Austenitic 316L steel is known for its good oxidation resistance and corrosion behavior.
However, the poor wear protection is its substantial disadvantage. In this study, laser surface …

The surface of the TC4 titanium alloy was treated by B–Al co-permeation at 900, 1000, and
1100° C for 4 h using the powder pack co-cementation method. The microstructure …

Sliding wear behaviour is a very complex procedure where several parameters, including
nature of the two abrading bodies and variables related to the conditions under which the …