Two refinery streams named light cycle oil and light coker gas oil were deeply characterized
to determine their possible use for hydrotreatment to produce commercial diesel. Typical …

Post the enforcement of the Global Sulphur Cap 2020, large amounts of marine fuel have
been produced as a mixture of two or more components to achieve a sulfur level of less than …

A highly dispersed nickel phosphide catalyst supported on SBA-15 was prepared and tested
for the hydrotreating of tire pyrolysis oil (TPO). Physicochemical properties of the prepared …

The effects of desilication (DS) of the zeolite β on the hydrocracking of polycyclic aromatics
were investigated using the Ni2P/β catalysts. The Ni2P/β catalysts were obtained by the …

Catalysis plays a fundamental role in the establishment of sustainable chemical
technologies that are efficient in terms of energy and atoms. Today, society relies heavily on …

NiMoS and CoMoS catalysts were synthesized and applied to hydrotreating (HDT) of FCC
light cycle oils (FCC-LCO) in an autoclave batch reactor at 613 K and 8.6 MPa H2. The S …

The γ‐Al2O3 supported Ni2P catalysts for propane dehydrogenation were prepared by one‐
pot method and evaluated to study the platinum‐like behaviour of Ni2P. The catalysts were …

A detailed understanding of the catalytic upgrading of light cycle oil (LCO) is important to
achieve effective deep hydrodesulfurization (HDS) when LCO is mixed with straight run gas …

Nickel, molybdenum and tungsten phosphides were obtained in situ directly in the reaction
medium for the hydrotreating of light cycle oil. Phosphides obtained were characterized by X …

The desulfurization of light cycle oil containing 2157 ppmw sulfur has been studied using
acetonitrile, N-methylpyrrolidone, and N, N-dimethylformamide as extraction solvents. The …