Liquid phase sintering (LPS) is a process for forming high performance, multiple-phase
components from powders. It involves sintering under conditions where solid grains coexist …

Sintering occurs when packed particles are heated to a temperature where there is sufficient
atomic motion to grow bonds between the particles. The conditions that induce sintering …

The sintering of nanosized particles is a scientific and technological topic that affects the
manufacture of bulk nanocrystalline materials and the understanding of the stability of …

The only handbook of mathematical relations with a focus on particulate materials
processing The National Science Foundation estimates that over 35% of materials-related …

Micro-sized single-crystalline Ni-rich cathodes are emerging as prominent candidates owing
to their larger compact density and higher safety compared with poly-crystalline …

In this paper, the effect of different surface finish metallization layers (Cu, Ni, Au and Ag) on
the shearing fracture toughness of sintered Ag bonded joints under various sintering …

A model for densification based on the master sintering curve concept is applied to solid-
state sintering of W and Mo and to liquid-phase sintering of W–10Cu and Mo–18Cu. The …

Blended 93W–5.6 Ni–1.4 Fe powders were sintered via the spark plasma sintering (SPS)
technique. Fine-grained 93W–5.6 Ni–1.4 Fe heavy alloys (W grain size is about 6µm) with …

Shearing fracture toughness of sintered silver (Ag) is an important parameter to reflect its
shearing resistance. In this paper, mode Ⅱ fracture toughness of sintered Ag is investigated …

Highlights The dihedral angle and liquid content of WHA alloy greatly influence the alloy's
density. High densification and deformation were observed in the sample with high liquid …