Dry reforming of methane (DRM) reaction has drawn much interest due to the reduction of
greenhouse gases and production of syngas. Coking and sintering have hindered the large …

Syngas generated from the catalytic dry reforming of methane (DRM) enables the
downstream production of H2 fuel and value-added chemicals. Ni-based catalysts with …

Ni@ SBA-15 monoliths with up to 5 wt.% of Ni were successfully synthetized by means of an
original and easy one-pot sol-gel method. Transmission Electron Microscopy (TEM), X-ray …

The increasing environmental concern on global warming has triggered intensive research
on sustainable utilization of greenhouse gases. CO2 (dry) reforming of methane (DRM) is …

Electrochemical CO reduction reaction (CORR) represents a potential approach to generate
value-added products. Nonetheless, it is generally challenging for conventional …

Dry reforming of methane (DRM) is considered a promising reforming technology that
converts natural gas in the Natuna Sea into synthesis gas, which can be further utilized to …

Alumina prepared by the sol-gel method, was impregnated with zirconia (5, 15 and 30 wt.%).
Subsequently, the resulting Al 2 O 3–ZrO 2 supports were impregnated with 15% Ni to …

A one-pot hydrothermal technique was used to make a series of Ti-incorporated
mesoporous SBA-15 with varying Si/Ti ratios. The synthesized mesoporous materials were …

Making Europe less dependent on imported fuels requires a long-term strategy. Low-quality
natural gas and biogas could be used to mitigate the energy crisis, and excess-methane dry …

CO 2 reforming of methane was studied over Ni and/or Ru supported on KIT-6 and KIT-6
promoted with Ce catalysts synthesized using the wet impregnation technique. The percent …