Microstructure and Properties of Ti-8Mo-12Fe and Ti-8Mo-8Cu alloys with Cr3C2 Additives Produced...

A low-cost and high-performance casted titanium matrix composite with Cr3C2 additions

J Zhang, Z Yang, X Yang, X Jia, M Yang, Y Guo, J Li… - Materials Letters, 2023 - Elsevier
A low-cost, high performance TiC reinforced titanium matrix composite was successfully
fabricated using an in situ reaction casting method. The results showed that the morphology …
被引用次数：11 相关文章 所有 2 个版本

A review on mechanical and tribological properties of sintered copper matrix composites

JP Annaraj, N Bose, N Hynes - AIP Conference Proceedings, 2019 - pubs.aip.org
Particle-reinforced metal matrix composites (MMCp) have been studied over the past
decades. Copper matrix composites are finding many applications due to their inborn …
被引用次数：11 相关文章 所有 3 个版本

Mechanical properties of a bi-continuous Cu–Cr3C2 composite

L Zhang, X Pang, K Gao, A Elias, W Chen - Materials Science and …, 2015 - Elsevier
A series of new Cu–Cr 3 C 2 composites with a three-dimensionally continuous
interpenetrating micro-structure was fabricated by porous carbide preforms using a metal …
被引用次数：13 相关文章 所有 3 个版本

Influence of Mo addition on microstructural and mechanical characteristics of TiXMo5Cu alloys manufactured by powder metallurgy

M Kurt, O Ozgun, O Ekinci… - Metallurgical …, 2024 - metallurgical-research.org
In the present study, TiXMo5Cu alloys were produced utilizing the powder metallurgy
technique. Alloy samples with different ratios of Mo added were shaped by uniaxial pressing …
相关文章
[PDF] jst.go.jp

Characteristics and properties of Ti-8Mo-6Cr alloys with added NbC powders through the vacuum sintering process at various temperatures

KT Huang, SH Chang, HT Wang - Materials Transactions, 2017 - jstage.jst.go.jp
In this study, three different powders are mixed and used to produce Ti-8Mo-6Cr-xNbC
alloys of three different proportions: Ti-8Mo-6Cr-1NbC, Ti-8Mo-6Cr-3NbC and Ti-8Mo-6Cr …
被引用次数：4 相关文章 所有 5 个版本