The all-pairs shortest-paths problem in weighted graphs is investigated. An algorithm—the
Hidden-Paths Algorithm—that finds these paths in time O(m^*n+n^2\logn), where m^* is the …

Surface cracks are commonly observed in coatings and films. When structures with coatings
are subject to stretching, opening mode cracks are likely to form on the surface, which may …

In this study, the internal stress distribution of a film on substrate structure (FOSS) under
tensile loads has been analyzed. Based on force balance principles, analytical solutions are …

The corrosion behavior and products of bulk Fe 2 B in liquid Al at 750° C were systematically
investigated by static immersion tests, and characterized in detail through the joint approach …

The three-point bending tests were carried out on zinc coating/304 stainless steel with
different film thicknesses by means of a universal testing device equipped with an acoustic …

The maximum interface sheer stress and crack density can be used as criteria for the
interfacial bonding property and fracture performance, respectively. In this paper, interface …

This paper presents an elastic solution for one microvoid embedded in an adhesive layer
close to a stiff bonding surface, which can be approximated as a semiinfinite domain with a …

With the development of flexible electronic technology, lately, there has been an increase in
demand for flexible electronic devices based on soft polymer-substrate metal film structures …

In this article, an analytical solution is presented for the steady-state axisymmetric thermal
stress distributions in a composite hollow cylinder. The cylinder is composed of two isotropic …

In this study, thermo elastic stress analysis is performed on a cylinder made of laminated
isotropic materials under thermomechanical loads. Laminated cylinders have many …