To improve the tribological properties of Inconel718 superalloy under harsh conditions such
as high temperature, the Co/TiN composite coatings were created by laser cladding on its …

Laser cladding of Stellite 6 on stainless steel 13Cr–4Ni has been performed to study the
performance of clad on solid particle erosion (SPE) and cavitation erosion at varied energy …

In the gas-turbine research field, superalloys are some of the most widely used materials as
they offer excellent strength, particularly at extreme temperatures. Vital components such as …

A study of microstructure and volumetric dilution of Cold Metal Transfer (CMT) clad of Nickel
based super alloy, Inconel 617M on type 316L stainless steel (SS) substrate was carried out …

In this study, the effects of cladding direction, preheating and post heat treatment on
microstructural and mechanical properties of laser cladded rail repairs are presented. Laser …

Cobalt rich Stellite 6 cladding shows a superior result against wear, corrosion and galling.
However, the metallurgical bonding at the cladding interface, if not achieved carefully, may …

The microstructure and sliding wear properties of Co-Cr-W alloy (Stellite 6) coatings were
studied in the dependence on the deposition technology. The HVOF as-sprayed, laser …

Co06/Ni60A duplex coating was fabricated on copper substrate by plasma cladding. To
clarify the evolution of microstructure and wear resistance of the coating during high …

This study intends to investigate the feasibility of using laser cladding as a potential process
to repair hot working tools by a hardfacing process. A Stellite 21 alloy coating was printed on …

This paper reports on investigations of wear characteristics of the Stellite 6 coating on AISI
4130 steel substrate using micro-plasma transferred arc (µ-PTA) powder deposition process …