Abstract Understanding 6xxx AA (Al-Mg-Si alloys) relies heavily on structural analysis at the
atomic level. Because the nanoscale precipitates that form during artificial ageing essentially …

In recent years, the severe energy consumption identified in the global power‐transmission
process makes the development of new generation of transmission materials with high …

Platform preheating is a common strategy towards reducing residual stress and distortion of
additively manufactured metal components by powder bed fusion–laser beam (PBF-LB) due …

The microstructural evolution and precipitation behavior in additively manufactured age-
hardenable TiB 2/Al-Zn-Mg-Cu composites were investigated. As-built, direct-aged, solution …

The conventional forging process for 6082 aluminum alloy entails the following steps:
preheating, hot forging, solution heat treatment (SHT), and artificial aging. In this study, 6082 …

Sn microalloying can depress the adverse effect of natural aging after quenching (ie, room-
temperature storage) of Al–Mg–Si alloys. However, the other effect of Sc micro-addition to …

This work aims at investigating the impact behavior of an additively manufactured AlSi10Mg
alloy subjected to different heat-treatment conditions. The commonly used heat-treatment …

Although the effect of Sc addition on the nano-phase transformation of precipitates in Al-Mg-
Si alloys has been evaluated in the literature, the properties and related explanation based …

In this work, we investigated the microstructure and the mechanical properties of extruded
Mg-xGd-0.5 Mn alloys (GMx0) with the variation of Gd content (0, 2, 4, 7 wt.%). For the GM00 …

A comprehensive and experimentally verified yield strength model of AA6005 Al–Mg–Si
sheets rapidly solidified via a novel Thin Strip (TS) casting route is developed and …