Tube components with end flanges are widely used in piping systems of industrial fields.
Generally, folding defects are prone to generate in the upsetting of the end flange tubes, for …

The present paper presents a comprehensive study based on numerical and experimental
investigations testing the use of NC lathe machine in SPIF process of a dome part made of …

The paper presented a new method for forming flanges on hollow parts by incremental
radial extrusion. In the classic process of radial extrusion, additional rings were used to limit …

A novel flaring-upsetting hybrid process which combines flaring with closed upsetting is put
forward in order to form end flange on thin-walled tube and it is able to effectively control the …

The motive of sustainable manufacturing is to develop manufacturing processes aiming at
optimum use of resources without creating environmental pollution in any form, and reduce …

Incremental forming process is recently developed to form tubular parts. The fabrication cost
and accuracy could be optimized if the effects of process parameters and the optimum …

The main aim of this work is to study the end forming behaviour of friction stir processed Al
6063-T6 tubes fabricated at different tool rotational speeds. Tube expansion, tube reduction …

The paper presents the numerical and experimental results of a new method for producing
flanges on hollow parts. With this new method, the flange is extruded by a movable sleeve …

In the present work, a novel manufacturing process of joining a rod to a sheet has been
proposed and demonstrated at the lab scale. The sheet is joined between two material …

This paper presents the results of a numerical analysis of a two-stage forging process for
producing a hollow part with an external flange. The numerical analysis was performed via …