Influence of processing conditions on the properties of thermal sprayed coating: a review
S Kumar, R Kumar - Surface Engineering, 2021 - journals.sagepub.com
Thermal spray coatings are a group of coating processes that enhance the performance of
parts by adding functionality to surfaces. In the past few decades, thermal spray coatings …
parts by adding functionality to surfaces. In the past few decades, thermal spray coatings …
A review on protection of boiler tube steels with thermal spray coatings from hot corrosion
The conventional steels and their alloys are not able to withstand high temperature
corrosion in boilers of thermal power plants. The problem of hot corrosion has become more …
corrosion in boilers of thermal power plants. The problem of hot corrosion has become more …
Microstructural and tribological resistance of flame-sprayed CoMoCrSi/WC-CrC-Ni and CoMoCrSi/WC-12Co composite coatings remelted by microwave energy
The hard facing composite coatings such as CoMoCrSi/30% WC-CrC-Ni and
CoMoCrSi/30% WC-12Co are coated on grade-2 titanium substrate through Flame spray …
CoMoCrSi/30% WC-12Co are coated on grade-2 titanium substrate through Flame spray …
Microstructure and tribological behavior of flame sprayed and microwave fused CoMoCrSi/CoMoCrSi–Cr3C2 coatings
This present work deals with the investigation of dry sliding wear behavior of CoMoCrSi and
CoMoCrSi–Cr 3 C 2 depositing on titanium substrate through Flame spray process …
CoMoCrSi–Cr 3 C 2 depositing on titanium substrate through Flame spray process …
[PDF][PDF] Mechanical and microstructural behaviour of wear resistant coatings on cast iron lathe machine beds and slides
The beds of the lathe and slides are subjected to abrasive and fatigue wear, which
significantly affects their working life. The objective of this study is to enhance the useful life …
significantly affects their working life. The objective of this study is to enhance the useful life …
An investigation of the wear behaviours of white cast irons under different compositions
C Çetinkaya - Materials & design, 2006 - Elsevier
In this study, wear behaviour of high chromium white cast iron turbine blades used in shot
peening machines was investigated against SiC and Al2O3 abrasive papers. Five different …
peening machines was investigated against SiC and Al2O3 abrasive papers. Five different …
Wear behaviour of bulldozer rollers welded using a submerged arc welding process
B Gülenç, N Kahraman - Materials & design, 2003 - Elsevier
The submerged arc welding process is commonly used due to its easy applicability, high
current density and its ability to deposit a large amount of weld metal using more than one …
current density and its ability to deposit a large amount of weld metal using more than one …
Abrasive wear characteristics and microstructure of Fe-based overlaid ploughshares in different field conditions
J Singh, SS Chatha, BS Sidhu - Soil and Tillage Research, 2021 - Elsevier
In the present research, two different Fe-based claddings, namely SZ (Fe–Cr, Fe–33.37 Cr–
3.83 C) and ZK (Fe–Mo, Fe–8.18 Mo–4.5 Cr–0.65 C) were overlaid on EN-42 steel substrate …
3.83 C) and ZK (Fe–Mo, Fe–8.18 Mo–4.5 Cr–0.65 C) were overlaid on EN-42 steel substrate …
Hot corrosion behaviour of carbon nanotubes reinforced chromium oxide composite coatings at elevated temperature
The present work aims to investigate the hot corrosion resistance of HVOF (high velocity oxy
fuel) sprayed CNT (Carbon nanotubes) reinforced Cr 2 O 3 coated ASTM-SA213-T22 (T22) …
fuel) sprayed CNT (Carbon nanotubes) reinforced Cr 2 O 3 coated ASTM-SA213-T22 (T22) …
Mechanical and microstructural properties of carbon nanotubes reinforced chromium oxide coated boiler steel
Purpose The purpose of this study was to fabricate carbon nanotubes (CNT)-reinforced
chromium oxide coatings and investigate mechanical and microstructural properties of these …
chromium oxide coatings and investigate mechanical and microstructural properties of these …