Aggregation and data analysis of corrosion studies in molten chloride and fluoride salts
Corrosion studies in molten fluoride and chloride salts were surveyed, and key data were
aggregated into a single dataset. Studies were graphed by salt purity, temperature, sample …
aggregated into a single dataset. Studies were graphed by salt purity, temperature, sample …
Corrosion of structural alloys in high-temperature molten fluoride salts for applications in molten salt reactors
G Zheng, K Sridharan - Jom, 2018 - Springer
Hastelloy N®, a nickel-based alloy, and 316 stainless steel are among the candidate
structural materials being considered for the construction of the molten salt reactor (MSR) …
structural materials being considered for the construction of the molten salt reactor (MSR) …
Corrosion of 316H stainless steel in flowing FLiNaK salt
Type 316H stainless steel samples were exposed to flowing FLiNaK salt for 1000 h in a
monometallic thermal convection loop (TCL) with a maximum temperature of 650° C and a …
monometallic thermal convection loop (TCL) with a maximum temperature of 650° C and a …
Visualizing time-dependent microstructural and chemical evolution during molten salt corrosion of Ni-20Cr model alloy using correlative quasi in situ TEM and in situ …
In situ monitoring of corrosion processes is important to fundamentally understand the
kinetics and evolution of materials in harsh environments. A quasi in situ transmission …
kinetics and evolution of materials in harsh environments. A quasi in situ transmission …
Electrochemical study of the dissolution of oxide films grown on type 316L stainless steel in molten fluoride salt
The corrosion behavior of oxide films grown on Type 316L stainless steel (SS) in molten
FLiNaK (LiF-NaF-KF: 46.5− 11.5− 42 mol.%) salt was investigated. The results show that the …
FLiNaK (LiF-NaF-KF: 46.5− 11.5− 42 mol.%) salt was investigated. The results show that the …
Thermophysical properties of FLiBe using moment tensor potentials
Fluoride salts are prospective materials for applications in some next-generation nuclear
reactors and their thermophysical properties at various conditions are of interest …
reactors and their thermophysical properties at various conditions are of interest …
Corrosion of 316L & 316H stainless steel in molten LiF-NaF-KF (FLiNaK)
W Doniger, C Falconer, A Couet, K Sridharan - Journal of Nuclear Materials, 2023 - Elsevier
The corrosion behavior of 316L and 316H stainless steels (low and high carbon,
respectively) in molten LiF-NaF-KF (FLiNaK) salt at 700° C for 500 h has been investigated …
respectively) in molten LiF-NaF-KF (FLiNaK) salt at 700° C for 500 h has been investigated …
First steps toward predicting corrosion behavior of structural materials in molten salts
To address the need for physics-based models to predict corrosion behavior of materials in
molten salts, the current work proposes potential methods to aid in selection of optimum …
molten salts, the current work proposes potential methods to aid in selection of optimum …
Study of the corrosion characteristics of 304 and 316L stainless steel in the static liquid lithium
DH Zhang, XC Meng, GZ Zuo, M Huang, L Li… - Journal of Nuclear …, 2021 - Elsevier
Liquid lithium (Li) is considered as the tritium breeder as well as a potential blanket coolant
and/or plasma-facing material (PFM) in fusion devices, while steels are widely used as an …
and/or plasma-facing material (PFM) in fusion devices, while steels are widely used as an …
Temperature-Dependent Properties of Molten Li2BeF4 Salt Using Ab Initio Molecular Dynamics
Molten lithium tetrafluoroberyllate (Li2BeF4) salt, also known as FLiBe, with a 2: 1 mixture of
LiF and BeF2 is being proposed as a coolant and solvent in advanced nuclear reactor …
LiF and BeF2 is being proposed as a coolant and solvent in advanced nuclear reactor …