Many abrasion resistant steels rely on a martensitic microstructure to ensure hardness,
which in general correlates with better wear performance. However, in practice the steel may …

Abrasion resistant steels in combination with a good formability and a desirable balance of
strength and ductility are in high demand for industrial applications. Current developments of …

Rolling/sliding wear behaviour of two newly designed low-carbon, continuously cooled,
carbide-free bainitic rail steels has been studied and compared with pearlitic rail steel …

The object of this paper is to study the influence of different strengthening methods on wear
resistance of ferrite–pearlite steel. Rolling/sliding wear tests were conducted for five railway …

In this study, the mechanical properties, wear behavior, and microstructures of high-strength
low-alloy steels with titanium contents of 0, 0.04, 0.1, and 2 wt% were systematically …

The wear performance and corresponding wear mechanism of a high strength low alloy
(HSLA) steel containing Mn, Cr, Ni and Mo are reported here. The wear performance of this …

In order to improve the overall performance of edge plates such as bulldozer blades,
composition and heat treatment processes were optimized on the martensitic wear-resistant …

In this paper, a series of ZrO 2 matrix high-temperature self-lubricating composites were
prepared by hot-press technique. The effect of Mo and Ag on the friction and wear behavior …

The microstructure, hardness, impact toughness and ring block wear properties of a novel
bainitic steel were investigated by means of scanning electron microscopy (SEM) …

The aims of this paper are to reveal the surface failure behavior of 70Mn martensite steel
under abrasive impact wear by impart wear tests. The wear tests were performed with the …