Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 718
The hot deformation behavior of an IN718 superalloy was studied by isothermal
compression tests under the deformation temperature range of 950–1100° C and strain rate …
compression tests under the deformation temperature range of 950–1100° C and strain rate …
Coupled quantitative modeling of microstructural evolution and plastic flow during continuous dynamic recrystallization
Continuous dynamic recrystallization (cDRX) dominates microstructural evolution during the
hot working of metallic materials with high stacking fault energy (SFE), such as aluminum …
hot working of metallic materials with high stacking fault energy (SFE), such as aluminum …
Electric current–assisted deformation behavior of Al-Mg-Si alloy under uniaxial tension
The tensile deformation behavior of Al-Mg-Si alloy under a pulsed electric current has been
investigated. Specimens subjected to three types of heat treatment, solution treatment …
investigated. Specimens subjected to three types of heat treatment, solution treatment …
Investigation of dynamic recrystallization and modeling of microstructure evolution of an Al-Mg-Si aluminum alloy during high-temperature deformation
The dynamic recrystallization (DRX) behavior and microstructure evolution of an Al-Mg-Si
aluminum alloy (AA6N01) during hot deformation are investigated by experiments and …
aluminum alloy (AA6N01) during hot deformation are investigated by experiments and …
Microstructure evolution, constitutive modeling and forming simulation of AA6063 aluminum alloy in hot deformation
L Xu, D Zhou, C Xu, H Zhang, W Qu, P Xie… - Materials Today …, 2023 - Elsevier
Hot compression tests of the AA6063 aluminum alloy are conducted on a Gleeble-3500
thermo-mechanical system with different temperatures, strain rates and compression …
thermo-mechanical system with different temperatures, strain rates and compression …
Microstructure, mechanical properties and deformation characteristics of Al-Mg-Si alloys processed by a continuous expansion extrusion approach
R Lu, S Zheng, J Teng, J Hu, D Fu, J Chen… - Journal of Materials …, 2021 - Elsevier
In the present work, a double-pass continuous expansion extrusion forming (CEEF) process
was proposed for an Al-Mg-Si alloy, in which the diameter of rods was gradually expanded …
was proposed for an Al-Mg-Si alloy, in which the diameter of rods was gradually expanded …
Experimental investigation and numerical prediction of the peripheral coarse grain (PCG) evolution during the extrusion of different AA6082 aluminum alloy profiles.
Abstract Peripheral Coarse Grain (PCG) is an undesirable defect that may occur in the
extrusion of medium-strength Al-Mg-Si aluminum alloys. This phenomenon usually degrade …
extrusion of medium-strength Al-Mg-Si aluminum alloys. This phenomenon usually degrade …
Transition of dynamic recrystallization mechanisms of as-cast AZ31 Mg alloys during hot compression
C Xie, JM He, BW Zhu, X Liu, J Zhang, XF Wang… - International Journal of …, 2018 - Elsevier
This study investigates the transition of dynamic recrystallization (DRX) mechanisms of as-
cast AZ31 Mg alloys during hot compression. It is experimentally revealed that the transition …
cast AZ31 Mg alloys during hot compression. It is experimentally revealed that the transition …
Numerical investigation of the surface recrystallization during the extrusion of a AA6082 aluminum alloy under different process conditions
The microstructure of 6xxx aluminum alloys deeply affects mechanical, crash, corrosion and
aesthetic properties of extruded profiles. Companies, especially in the transportation sector …
aesthetic properties of extruded profiles. Companies, especially in the transportation sector …
Influence of extrusion parameters on microstructure, texture, and second-phase particles in an Al-Mg-Si alloy
The extrusion parameters greatly influence the microstructures of aluminum alloys, and
further determine the mechanical properties of the final products. In this work, using a self …
further determine the mechanical properties of the final products. In this work, using a self …