Aircraft engine parts, specifically blades, discs, and sheets are primarily made up of Inconel
718, which required drilled holes for assembly. Drilling holes in Inconel 718 is very difficult …

This study assesses the sustainable subtractive manufacturing of Wire Arc Additive
Manufactured (WAAMed) Inconel 625 (IN625). Compared to other additive manufacturing …

In a rapidly changing manufacturing environment, accurate and efficient models are
necessary to predict cutting force and feature quality in the mechanical micro-drilling …

During metal milling, top burrs will inevitably appear on the edge of the workpiece, which
seriously reduces the edge quality and assembly accuracy of the workpiece, thereby …

Continuous development and adoption of machine tools using retrofittable solutions enable
the local machining industries a cost-effective way to address environmental and socio …

Nowadays, lean, agile, and flexible manufacturing processes are required concerning
varying customer demands. For the same, precision machines are needed to fulfill the …

The burr at the hole exit is one of the key factors affecting bone drilling performances. In
order to reduce burr height at hole exit during cortical bone drilling, the four key parameters …

Dry hard turning, an environmentally friendly process, has many benefits over cutting-fluid-
based hard-turning operations. The environmental impact in dry hard turning is positive as …