Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies

M Liu, NHS Tay, S Bell, M Belusko, R Jacob… - … and Sustainable Energy …, 2016 - Elsevier
A concentrating solar power (CSP) system converts sunlight into a heat source which can be
used to drive a conventional power plant. Thermal energy storage (TES) improves the …

Corrosion mechanisms in molten salt thermal energy storage for concentrating solar power

S Bell, T Steinberg, G Will - Renewable and Sustainable Energy Reviews, 2019 - Elsevier
High temperature corrosion of molten salt containment materials is of great interest for
thermal energy storage systems used with concentrating solar power. Mitigating this …

[图书][B] High temperature oxidation and corrosion of metals

DJ Young - 2008 - books.google.com
Preface p. ix Glossary of Symbols p. xiii Abbreviations and Acronyms p. xvii 1 The Nature of
High Temperature Oxidation p. 1 1.1 Metal Loss Due to the Scaling of Steel p. 1 1.2 Heating …

[图书][B] Corrosion and surface chemistry of metals

D Landolt - 2007 - taylorfrancis.com
Providing a carefully developed and comprehensive overview of the corrosion chemistry of
metallic materials, this book covers the principal methods of corrosion prevention. It includes …

Hot corrosion of materials: a fluxing mechanism?

RA Rapp - Corrosion science, 2002 - Elsevier
Hot corrosion is the accelerated oxidation of a material at elevated temperature induced by a
thin film of fused salt deposit. Fused Na2SO4, which is the dominant salt involved in hot …

A review on molten sulfate salts induced hot corrosion

S Hu, H Finklea, X Liu - Journal of Materials Science & Technology, 2021 - Elsevier
Hot corrosion has been extensively observed in various high temperature applications,
which might cause large economic losses. To deepen the insight and understanding of hot …

High-temperature corrosion of superalloys

J Stringer - Materials Science and Technology, 1987 - journals.sagepub.com
The performance of gas turbines has been improved by the development of alloys with
progressively increasing high-temperature capabilities. While both strength and corrosion …

Stability of protective oxide films in waste incineration environment—solubility measurement of oxides in molten chlorides

T Ishitsuka, K Nose - Corrosion science, 2002 - Elsevier
Solubility measurements of several oxides in molten NaCl–KCl and NaCl–KCl–Na2SO4–
K2SO4 were conducted in three different levels of basicity. The dissolution behavior of the …

Chemistry and electrochemistry of hot corrosion of metals

RA Rapp - materials science and engineering, 1987 - Elsevier
Hot corrosion beneath fused salt films may involve the fluxing of the protective oxides as
either acidic or basic solutes. High temperature Pourbaix-type diagrams can be used to …

[HTML][HTML] Review on the challenges of salt phase change materials for energy storage in concentrated solar power facilities

TC Ong, M Sarvghad, S Bell, G Will… - Applied Thermal …, 2023 - Elsevier
Abstract Concentrated Solar Thermal Power has an advantage over other renewable
technologies because it can provide 24-hour power availability through its integration with a …