Copper alloys are widely used in the lead frame, high-speed railway and other applications
due to their high electrical conductivity and adequate mechanical properties. In this work, the …

Dynamic recrystallization (DRX), a resultant of severe plastic deformation occurring at
moderately high temperatures, plays a pivotal role in deciding the structural integrity of the …

In the microstructure characterization of metallic materials, the intercept method is one of the
most widely accepted approaches to determine average grain size due to its simplicity …

The effect of aging treatment on the microstructure of Cu–Cr–Ti alloy was studied by
Scanning electron microscope (SEM) and Transmission electron microscope (TEM), and its …

Abstract Cu-Ni-Si alloy is widely used in electronics industry due to its high electrical
conductivity and high strength. In this paper, the Cu-Ni-Co-Si-Cr alloy is prepared by ZG …

Cracks are easy to occur during cogging of U720Li ingots due to the high deformation
resistance and poor hot ductility. In this paper, the low-carbon alloy (0.014 wt% C) and high …

Materials are the backbone of any engineering structure and aerospace materials
technologies are therefore closely guarded, in view of their dual use. Indian national space …

The relationship among microstructure, mechanical properties and texture of TA32 titanium
alloy sheets during hot tensile deformation at 800° C was investigated. In the test, the …

The precipitation behavior and strengthening effects of the Cu-0.42 Cr-0.16 Co alloy aged at
450° C was investigated using atom-probe tomography, transmission electron microscopy …

The effect of the initial powder particle size on the hot workability of Ni-based superalloys
was investigated. Herein, four powders with different particle size ranges (< 53, 53–106, 106 …